Diamond RF2G/Q Handmatig - Pagina 6
Blader online of download pdf Handmatig voor {categorie_naam} Diamond RF2G/Q. Diamond RF2G/Q 10 pagina's.
Ook voor Diamond RF2G/Q: Gebruikers- en installatiehandleiding (10 pagina's)
Pagina afdrukkenGas connection
The appliances operate on the following gases : Butane G30, Propane G31,
Natural Gas G20/G25. The appliances are supplied as standard with a
butane/propane injector corresponding to category II2E+3+. The connection is
made with a 1/2 thread.
The heat output of the appliance is:
- GST 7 / 145847 / PGAZ7
- GST 12 / 145853 / PGAZ12
- GST 14 / PGZA14
- GST 19 / PGAZ19 / 27036R
- GST 21 / PGAZ21 / 27066
For use in Natural Gas, change the injectors of the burners (delivered in a plastic
bag in the packing). Screw in the 19 mm venturi screw.
Connect the appliance to the gas supply pipe by interposing a shut-off valve to
isolate the appliance from the rest of the installation.
Check the supply pressure, when all the burners are lit, using a pressure gauge.
It must be equal to the indications on the nameplate.
The fresh air flow rate required for the combustion air supply is:
- GST 7 / 145847 / PGAZ7
- GST 12 / 145853 / PGAZ12
- GST 14 / PGZA14
- GST 19 / PGAZ19 / 27036R
- GST 21 / PGAZ21 / 27066
General conditions of installation
The installation and maintenance of the appliance must be carried out in
accordance with the regulations and rules in force, in particular:
General specifications
For all appliances:
Article GZ
Installation with combustible gases and liquefied hydrocarbons.
Then, according to use:
Article CH
Heating, ventilation, refrigeration
Air conditioning and domestic hot water steam generation.
G03407
7 kW
12 kW
14 kW
19 kW
21 kW
4 m3/h
24 m3/h
28 m3/h
38 m3/h
42 m3/h
13
December 2020