Chrysler 200 CONVERTIBLE 2011 Specificaties
Blader online of download pdf Specificaties voor {categorie_naam} Chrysler 200 CONVERTIBLE 2011. Chrysler 200 CONVERTIBLE 2011 5 pagina's.
Pagina afdrukken
NOTE: Information shown is correct at time of publication and is subject to change.
2011 Chrysler 200 Convertible
SPECIFICATIONS
The information shown is preliminary and based on data available at the time of publication. All dimensions are in inches
(millimeters) unless otherwise noted. All dimensions are measured at curb weight with standard wheels and tires unless
otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
EPA Vehicle Class
Introduction Date
ENGINE: 2.4-LITER, GASOLINE, DOHC, 16-VALVE, VVT, SMPI I-4
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression
Power (SAE net, estimated)
Torque (SAE net, estimated)
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Estimated EPA Fuel Economy mpg
(City/Hwy)
(a) Meets Federal Tier 2, Bin 5 emissions requirements and PZEV requirements in California, Massachusetts, New York, Maine,
Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington. Meets Euro IV emissions
requirements.
ENGINE: 3.6-LITER, GASOLINE, DOHC, 24-VALVE, SMPI V-6
Availability
Type and Description
Displacement
Bore x Stroke
C H R Y S L E R 2 0 0 C O N V E R T I B L E
Four-door sedan
Sterling Heights Assembly, Mich.
Mid-size sedan
January 2011
Standard on 200 Touring
Four-cylinder inline, tuned intake manifold with electronic active charge
motion control valves with dual counter-rotating balance shafts
144 cu. in. (2360 cu. cm)
3.46 x 3.82 (88 x 97)
Chain-driven DOHC, 16 valves, electronically controlled dual variable-
valve timing (VVT), direct-acting shimless mechanical bucket tappets
Sequential, multi-port, electronic, returnless
High-pressure die-cast aluminum block with dry iron liners, cast-aluminum
cylinder heads, cast-aluminum ladder frame, forged-steel crankshaft
10.5:1
173 bhp (129 kW) @ 6,000 rpm (71 bhp/liter)
166 lb.-ft. (225 N•m) @ 4,400 rpm
6,500 rpm (electronically limited)
Unleaded regular, 87 octane (R+M)/2
4.5 qt. (4.23L) SAE 5W-20
7.7 qt. (7.3L)
Single catalytic converter dual heated oxygen sensors and engine
(a)
features
18 mpg city/29 mpg highway
Available on 200 Touring. Standard on Limited and S
60-degree bank angle, liquid-cooled, three-plenum intake manifold with
electronically controlled manifold tuning valve and short-runner valves
3605 cu. cm
3.78 x 3.28 (96 x 83 mm)
/
S P E C I F I C A T I O N S
1