3B SCIENTIFIC PHYSICS Escola 10 Instructieblad - Pagina 3

Blader online of download pdf Instructieblad voor {categorie_naam} 3B SCIENTIFIC PHYSICS Escola 10. 3B SCIENTIFIC PHYSICS Escola 10 6 pagina's.
Ook voor 3B SCIENTIFIC PHYSICS Escola 10: Instructieblad (4 pagina's)

Pagina afdrukken

Operating alignment:

Power supply:

Connectors:

Voltage ranges:

Current ranges:

Input resistance:

Voltage drop when

measuring current:

Accuracy:

Electrical

zero-point offset:

Accuracy with

zero-point offset:

Frequency ranges:

1 V – 600 V:

0.3 V:

Current ranges:

Signal form:

Peak factor:

Overload protection

Voltage:

Current ranges:

Current limit integral:

Transient limitI

FMS

Long-term current

limitI

FAV

Ambient temperature: 5° C...23°C...40° C

Storage temperature:

Relative humidity:

Shock tests:

Electrical safety:

Safety specifications:

Excess voltage

category:

Contamination level:

Protection type:

Electromagnetic compatibility:

Interference emission: EN 55011:2009

Interference resistance: EN 61326-1:2013

Vertical/horizontal

1x 1.5 V, AA IEC LR6

4-mm safety sockets

0.1, 0.3, 1, 3, 10, 30,

100, 300, 600 V AC/DC

0.1, 0.3, 1, 3, 10, 30,

100, 300 mA; 1, 3, 10 A

AC/DC

1 M AC/DC

100 mV approx. AC/DC

DC class 2, AC class 3

in all DC ranges

Class 5

20 Hz...50 Hz...20 kHz

20 Hz...50 Hz...9 kHz

20 Hz...50 Hz...43 kHz

Sine (1% max. discrep-

ancy)

600 V long-term in all

voltage ranges

450 A

300 A

20 A

-20...70° C

< 85% with no conden-

sation

max. 147 m/s²

EN 61010-1

CAT I: 600 V

IP20

4. Description

The Escola 10 multimeter enables precision

measurements by analogue means in education,

training and practical applications. It measures

AC and DC voltage or current and provides for

measurements with the needle centred on the

dial for DC quantities. Resistance (R) and con-

ductance (G) or impedance (Z) and admittance

(Y) can be obtained by division.

All measurement ranges are selected by means of

the measurement range dial. Two linearised mirror

scales, graded in a 1:3 ratio, guarantee easy read-

ability of the measured values.

The equipment is turned on by means of the

operating mode switch, which is also used to

select between AC, DC or centre zero-point.

The trimmer for setting the zero point in the

centre allows the zero point to be set precisely

when it drifts electrically.

Isolation of the sockets for voltage and current

measurement allow both to be measured in

succession simply by turning the range selector

switch, without any need for reconnecting or

changing the measuring leads.

Use of a robust core-magnet measuring instrument

set-up and an impact resistant casing allows the

instrument to withstand rough handling in awkward

conditions.

The Escola 10 is protected in such a way that

overloads in the selectable current ranges

automatically cause the power to be limited.

5. Operation

Switch the multimeter on by select the de-

•

sired operating mode,

To turn off the multimeter, set the mode

•

switch to the off position

To test the battery, disconnect all leads from

•

the multimeter, set the operating mode

switch to

needle should deflect all the way to the end.

If this is not the case, the battery must be

replaced immediately.

and the measuring range

. In the

range, the