Connection
Caution:
ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
Before starting the connection, make sure that the power of the devices to be connected such
as the camera and a PC are off or the power cords of the devices are disconnected.
Before starting the connection, prepare the required devices and cables.
z
Connect an RCA plug to the monitor out connec-
tor provided on the rear only for adjustment of the
angular field of view on the video monitor.
Important:
• The monitor out connector is provided only for
checking the adjustment of the angular field of
view on the video monitor when installing the cam-
era or when servicing.
It is not provided for recording/ monitoring use.
x
Connect to the power source.
Important:
• 24 V AC/12 V DC power supply shall be insulated
against 120 V AC.
• When connecting to 24 V AC/12 V DC power
source
q Loosen the screw of the provided power cord
plug.
w Insert the power cord of an optional AC adapter to
the power cord plug.
When using 24 V AC/12 V DC power supply other
than the WV-PS16 (option), remove 3 mm - 7 mm
{1/8" - 9/32"} of the outer jacket of the power cord
from a power supply and twist the core of the
power cord to prevent a short circuit.
Specification of cord (wire): AWG #22 - #28
single core, twisted
* Make sure that the exposed core wires are
completely hidden after inserting the power
cord.
e Tighten the screws to fix the inserted power
cord.
r Connect the power cord plug to the 24 V
AC/12 V DC power cord terminal on the rear
of the camera.
100BASE-T/
FOCUS
LINK
100BASE-TX
ACT
ASSIST
POWER
SD
CARD
AUDIO OUT
MIC IN
MONITOR OUT
EXT I/O
12V
IN
24V
IN
C B A
1 2 3 4
100BASE-T/
FOCUS
LINK
100BASE-TX
ACT
ASSIST
POWER
SD
CARD
AUDIO OUT
MIC IN
MONITOR OUT
EXT I/O
12V
IN
24V
IN
C B A
1 2 3 4
To power source
(24 V AC/12 V DC)
Approx. 3 mm - 7 mm
Power cord plug (provided)
<Ratings>
AC24 V
A
N
B
GND
C
L
* Make sure that the power cord plug
is inserted to the power cord termi-
nal firmly.
Connect to the
video monitor, etc.
@
!
DC12 V
@(GND)
NC
!
23