Panasonic WV-NP304 Instrukcja instalacji - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera Panasonic WV-NP304. Panasonic WV-NP304 36 stron. Ip video cameras
Również dla Panasonic WV-NP304: Instrukcja instalacji (36 strony), Broszura (2 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony), Odniesienie (2 strony), Tabela porównawcza (6 strony), Instrukcja obsługi (20 strony), Uwaga dotycząca integracji (8 strony)

Panasonic WV-NP304 Instrukcja instalacji

Connection

Caution:
ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
Before starting the connection, make sure that the power of the devices to be connected such
as the camera and a PC are off or the power cords of the devices are disconnected.
Before starting the connection, prepare the required devices and cables.
z
Connect an RCA plug to the monitor out connec-
tor provided on the rear only for adjustment of the
angular field of view on the video monitor.
Important:
• The monitor out connector is provided only for
checking the adjustment of the angular field of
view on the video monitor when installing the cam-
era or when servicing.
It is not provided for recording/ monitoring use.
x
Connect to the power source.
Important:
• 24 V AC/12 V DC power supply shall be insulated
against 120 V AC.
• When connecting to 24 V AC/12 V DC power
source
q Loosen the screw of the provided power cord
plug.
w Insert the power cord of an optional AC adapter to
the power cord plug.
When using 24 V AC/12 V DC power supply other
than the WV-PS16 (option), remove 3 mm - 7 mm
{1/8" - 9/32"} of the outer jacket of the power cord
from a power supply and twist the core of the
power cord to prevent a short circuit.
Specification of cord (wire): AWG #22 - #28
single core, twisted
* Make sure that the exposed core wires are
completely hidden after inserting the power
cord.
e Tighten the screws to fix the inserted power
cord.
r Connect the power cord plug to the 24 V
AC/12 V DC power cord terminal on the rear
of the camera.
100BASE-T/
FOCUS
LINK
100BASE-TX
ACT
ASSIST
POWER
SD
CARD
AUDIO OUT
MIC IN
MONITOR OUT
EXT I/O
12V
IN
24V
IN
C B A
1 2 3 4
100BASE-T/
FOCUS
LINK
100BASE-TX
ACT
ASSIST
POWER
SD
CARD
AUDIO OUT
MIC IN
MONITOR OUT
EXT I/O
12V
IN
24V
IN
C B A
1 2 3 4
To power source
(24 V AC/12 V DC)
Approx. 3 mm - 7 mm
Power cord plug (provided)
<Ratings>
AC24 V
A
N
B
GND
C
L
* Make sure that the power cord plug
is inserted to the power cord termi-
nal firmly.
Connect to the
video monitor, etc.
@
!
DC12 V
@(GND)
NC
!
23