HP ProCurve 1600M Installatiehandleiding - Pagina 36

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP ProCurve 1600M. HP ProCurve 1600M 46 pagina's. Redundant power supply
Ook voor HP ProCurve 1600M: Specificatieblad (12 pagina's), Lees mij eerst (8 pagina's), Handleiding voor recensenten (27 pagina's), Aanvullende handleiding (2 pagina's), Aanvullende handleiding (2 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (36 pagina's), Installatiehandleiding (28 pagina's), Handleiding voor snelle installatie (2 pagina's), Handleiding voor snelle installatie (4 pagina's), Gebruikershandleiding (8 pagina's), Handmatig supplement (28 pagina's), Lees mij eerst (16 pagina's), Installatie en verwijdering (2 pagina's), Installatiehandleiding (12 pagina's), Handleiding voor planning en implementatie (40 pagina's), Instructies voor demontage aan het einde van de levensduur van het product (2 pagina's), Diagnostische handleiding (2 pagina's), Demontage-instructies (2 pagina's)

Pagina afdrukken
HP ProCurve 1600M Installatiehandleiding
IMPORTANT
NOTE

Specifications

Specifications
Specifications
Except as noted below, refer to the specifications provided in the HP
ProCurve Switch 4000M and 8000M Installation Guide.

NEBS Compliance

The HP DC ProCurve Switch has been tested by an independent
laboratory and found compliant with Telcordia (formerly Bellcore) NEBS
GR-63-CORE, Network Equipment-Building System (NEBS)
Requirements: Physical Protection; and GR-1089-CORE, Electromagnetic
Compatibility and Electrical Safety – Generic Criteria for Network
Telecommunications Equipment. NEBS compliance includes all "Level 3"
criteria plus all applicable "Other Criteria" of Telcordia SR-3580,
Network Equipment-Building System (NEBS) Criteria Levels.
The HP DC ProCurve Switch is suitable for connection to intrabuilding
or non-exposed wiring or cabling only. For compliance with NEBS
lightning transient requirements, only shielded interface cables (STP)
may be used and the cables must be grounded at both ends. For
non-NEBS installations, unshielded twisted-pair (UTP) cables may be
used.

Electrical

Nominal input voltage
Input current:
Input voltage range:
36
-48 or -60 V DC
8 A maximum, 4 A typical at -48 V DC
-36 to -72 V DC
Appendix A