HP ProCurve 1600M Installation Manual - Page 36

Browse online or download pdf Installation Manual for Switch HP ProCurve 1600M. HP ProCurve 1600M 46 pages. Redundant power supply
Also for HP ProCurve 1600M: Specification Sheet (12 pages), Read Me First (8 pages), Reviewer's Manual (27 pages), Supplementary Manual (2 pages), Supplementary Manual (2 pages), Installation Manual (28 pages), Installation Manual (36 pages), Installation Manual (28 pages), Quick Setup Manual (2 pages), Quick Setup Manual (4 pages), User Manual (8 pages), Manual Supplement (28 pages), Read Me First (16 pages), Installation And Removal (2 pages), Installation Manual (12 pages), Planning And Implementation Manual (40 pages), Product End-Of-Life Disassembly Instructions (2 pages), Diagnostics Manual (2 pages), Disassembly Instructions (2 pages)

Print Page

IMPORTANT

NOTE

Specifications

Except as noted below, refer to the specifications provided in the HP

ProCurve Switch 4000M and 8000M Installation Guide.

The HP DC ProCurve Switch has been tested by an independent

laboratory and found compliant with Telcordia (formerly Bellcore) NEBS

GR-63-CORE, Network Equipment-Building System (NEBS)

Requirements: Physical Protection; and GR-1089-CORE, Electromagnetic

Compatibility and Electrical Safety – Generic Criteria for Network

Telecommunications Equipment. NEBS compliance includes all "Level 3"

criteria plus all applicable "Other Criteria" of Telcordia SR-3580,

Network Equipment-Building System (NEBS) Criteria Levels.

The HP DC ProCurve Switch is suitable for connection to intrabuilding

or non-exposed wiring or cabling only. For compliance with NEBS

lightning transient requirements, only shielded interface cables (STP)

may be used and the cables must be grounded at both ends. For

non-NEBS installations, unshielded twisted-pair (UTP) cables may be

used.

Nominal input voltage

Input current:

Input voltage range:

-48 or -60 V DC

8 A maximum, 4 A typical at -48 V DC

-36 to -72 V DC

Appendix A