HP ProCurve 1810G-24 Handleiding voor installatie en aan de slag - Pagina 19
Blader online of download pdf Handleiding voor installatie en aan de slag voor {categorie_naam} HP ProCurve 1810G-24. HP ProCurve 1810G-24 48 pagina's. Procurve 1810g series
Ook voor HP ProCurve 1810G-24: Specificaties (2 pagina's), Informatie over veiligheid en regelgeving (2 pagina's)
Pagina afdrukken
Wall Mounting
You can mount the switch on a wall with either the front or rear panel facing
up.
W A R N I N G
For safe operation, please read the "Installation Precautions" on
page 2-2
It is recommended the switch be mounted with the ports facing up or
downward.
C a u t i o n
The switch should be mounted only to a wall or wood surface that is at least
1/2-inch (12.7 mm) plywood or its equivalent.
1.
2.
and
page
2-3, before mounting the switch.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Attach the switch to the wall or wood surface with two 5/8-inch
(15.875 mm) number 12 wood screws (not included).
Installing the Switch
Installation Procedure
2-9