HP ProCurve 1810G-24 설치 및 시작하기 매뉴얼 - 페이지 19
{카테고리_이름} HP ProCurve 1810G-24에 대한 설치 및 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP ProCurve 1810G-24 48 페이지. Procurve 1810g series
HP ProCurve 1810G-24에 대해서도 마찬가지입니다: 사양 (2 페이지), 안전 및 규제 정보 (2 페이지)
페이지 인쇄
Wall Mounting
You can mount the switch on a wall with either the front or rear panel facing
up.
W A R N I N G
For safe operation, please read the "Installation Precautions" on
page 2-2
It is recommended the switch be mounted with the ports facing up or
downward.
C a u t i o n
The switch should be mounted only to a wall or wood surface that is at least
1/2-inch (12.7 mm) plywood or its equivalent.
1.
2.
and
page
2-3, before mounting the switch.
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Attach the switch to the wall or wood surface with two 5/8-inch
(15.875 mm) number 12 wood screws (not included).
Installing the Switch
Installation Procedure
2-9