HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 pagina's. 1u rackmount tape enclosure
Ook voor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Installatie-instructies (2 pagina's), Handleiding voor installatie-instructies (20 pagina's), Release Release (14 pagina's), Installatie-instructies (2 pagina's), Referentiehandleiding (46 pagina's)

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

Figure 10: Installing the switch into a rack (HP System/e rack)

8. Tighten the nuts installed in

Note:

screw with captive star lock washer from either side of the rack uprights.

9. Continue the installation by returning to one of the following guides as

Addendum Pg

To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head

appropriate.

a. "Connecting AC Power" on page 45 in the HP StorageWorks SAN Switch

2/32 Installation Guide, Version 4.0.x.

b. "Connecting AC Power" on page 45 in the HP StorageWorks SAN Switch

2/16 Installation Guide, Version 3.0.x.

c. Connecting the power cord in step 8 on page 45 in the HP StorageWorks

SAN Switch 2/8 Installation Guide, Version 3.0.x.

step a

of step 4 on page 5. See

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Figure