Alpha Design Labs GT40 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alpha Design Labs GT40. Alpha Design Labs GT40 15 pagina's. Usb dac

Alpha Design LAbs

Playback of digital files stored on a PC via Line Out

PC > USB cable > GT-40 > Analog Line Out > Preamp

Notes: USB button on the front panel must be in the USB setting.

Recording from an LP to PC hard drive

Turntable > Phono Cable > GT-40 Analog MM/MC Line In > USB Cable > PC

Note: USB button on the front panel must be in the Phono/Line setting and the MM/MC/Line switch on the rear

panel must be switched to the appropriate cartridge setting, either Moving Coil or Moving Magnet. Caution: Do not

switch between settings on the MM/MC/Line switch while the GT40 power is powered on. This may damage

speakers.

Note: During Recording

To monitor while recording the GT40 must be connected to the preamp via the Analog Line Outputs.

Recording from an Analog Source other than a Turntable to PC hard drive

Analog Source > Line Cable > GT40 Analog Line or Phono MM/MC In > USB Cable > PC

Note: USB button on the front panel must be in the Phono/Line setting and the MM/MC/Line switch on the rear

panel must be switched to Line. Caution: Do not switch between settings on the MM/MC/Line switch while the

GT40 power is powered on. This may damage speakers.

Note: During Recording

To monitor while recording the GT40 must be connected to the preamp via the Analog Line Outputs.