Alpha Design Labs GT40 Kullanıcı Kılavuzu - Sayfa 6

Medya Dönüştürücü Alpha Design Labs GT40 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alpha Design Labs GT40 15 sayfaları. Usb dac

Alpha Design LAbs

Playback of digital files stored on a PC via Line Out

PC > USB cable > GT-40 > Analog Line Out > Preamp

Notes: USB button on the front panel must be in the USB setting.

Recording from an LP to PC hard drive

Turntable > Phono Cable > GT-40 Analog MM/MC Line In > USB Cable > PC

Note: USB button on the front panel must be in the Phono/Line setting and the MM/MC/Line switch on the rear

panel must be switched to the appropriate cartridge setting, either Moving Coil or Moving Magnet. Caution: Do not

switch between settings on the MM/MC/Line switch while the GT40 power is powered on. This may damage

speakers.

Note: During Recording

To monitor while recording the GT40 must be connected to the preamp via the Analog Line Outputs.

Recording from an Analog Source other than a Turntable to PC hard drive

Analog Source > Line Cable > GT40 Analog Line or Phono MM/MC In > USB Cable > PC

Note: USB button on the front panel must be in the Phono/Line setting and the MM/MC/Line switch on the rear

panel must be switched to Line. Caution: Do not switch between settings on the MM/MC/Line switch while the

GT40 power is powered on. This may damage speakers.

Note: During Recording

To monitor while recording the GT40 must be connected to the preamp via the Analog Line Outputs.