Alpha Group Out Back Power MATE Series Overzicht - Pagina 12
Blader online of download pdf Overzicht voor {categorie_naam} Alpha Group Out Back Power MATE Series. Alpha Group Out Back Power MATE Series 14 pagina's. System display and controller
Pagina afdrukken
Accessing the Advanced Menu:
MAIN--------------------
3:02:14P
SUM
STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV/PASSWORD------------
Enter the password
132
ENTER INC
DEC
EXIT
ADV/PASSWORD------------
Enter the password
141
ENTER INC
DEC
EXIT
ADV--------------------
choose device
FX
CC
DC
MATE
MAIN-------------------
To return to the Main
3:02:14P
screen at any time:
SUM
STATUS SETUP ADV
Press and hold the 2 left soft keys at the same
time. Release when the Main screen appears.
NOTE: The values shown in this illustration
will vary depending on the model of inverter.
900-0131-01-00 Rev A.vsd\FNDC Adv\2012-03-21
©2012 OutBack Power Technologies. All Rights Reserved.
(continued)
ADV/DC/PAGE1
choose category
ADV
BAT SHUNT PG2
ADV/DC/BAT----------P03
ADV/DC/SHUNT--------P03
battery capacity
shunt A mode
enabled
110 amphours
TOP
INC
DEC
ADV
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt B mode
enabled
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt C mode
disabled
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt setup complete
TOP
ADV
MAIN
ADV/DC/PG2
choose category
PG1 CHARGE AUX
PG3
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
return amps
10.4
currently
MAN-OFF
DOWN INC
DEC
TOP
DOWN
OFF AUTO
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
battery voltage
26.0
high volts
29.0 Vdc
DOWN INC
DEC
TOP
DOWN
INC
DEC
ADV/DC/AUXCONTROL
ADV/DC/CHARGE
low volts
22.0 Vdc
parameters met time
1 minutes
DOWN
INC
DEC
DOWN INC
DEC
TOP
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
charge factor
93%
SOC high
90%
DOWN INC
DEC
TOP
DOWN
INC
DEC
ADV/DC/AUXCONTROL
ADV/DC/CHARGE
SOC low
59%
charge parameters
complete
DOWN
INC
DEC
TOP
ADV
MAIN
ADV/DC/AUXCONTROL
high set point delay
1 minutes
DOWN
INC
DEC
ADV/DC/PG3---------P03
choose category
PG2 RESET
CLR
MAIN
ADV/DC/RESET-------P03
ADV/DC/CLEAR
reset DC to factory
clear data log
defaults?
memory?
ON
NO
YES
TOP
YES
TOP
TOP
ADV/DC/AUXCONTROL
low set point delay
1 minutes
TOP
DOWN
INC
DEC
TOP
ADV/DC/AUXCONTROL
invert logic YES
TOP
DOWN
YES
NO
TOP
ADV/DC/AUXCONTROL
aux parameters
complete
TOP
TOP
ADV
MAIN
NO
TOP
MAIN--------------------
3:02:14P
SUM STATUS SETUP
ADV
Page 10