Alpha Group Out Back Power MATE Series Przegląd - Strona 12
Przeglądaj online lub pobierz pdf Przegląd dla Jednostka sterująca Alpha Group Out Back Power MATE Series. Alpha Group Out Back Power MATE Series 14 stron. System display and controller
Drukuj stronę
Accessing the Advanced Menu:
MAIN--------------------
3:02:14P
SUM
STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV/PASSWORD------------
Enter the password
132
ENTER INC
DEC
EXIT
ADV/PASSWORD------------
Enter the password
141
ENTER INC
DEC
EXIT
ADV--------------------
choose device
FX
CC
DC
MATE
MAIN-------------------
To return to the Main
3:02:14P
screen at any time:
SUM
STATUS SETUP ADV
Press and hold the 2 left soft keys at the same
time. Release when the Main screen appears.
NOTE: The values shown in this illustration
will vary depending on the model of inverter.
900-0131-01-00 Rev A.vsd\FNDC Adv\2012-03-21
©2012 OutBack Power Technologies. All Rights Reserved.
(continued)
ADV/DC/PAGE1
choose category
ADV
BAT SHUNT PG2
ADV/DC/BAT----------P03
ADV/DC/SHUNT--------P03
battery capacity
shunt A mode
enabled
110 amphours
TOP
INC
DEC
ADV
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt B mode
enabled
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt C mode
disabled
DOWN
EN
DIS
TOP
ADV/DC/SHUNT--------P03
shunt setup complete
TOP
ADV
MAIN
ADV/DC/PG2
choose category
PG1 CHARGE AUX
PG3
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
return amps
10.4
currently
MAN-OFF
DOWN INC
DEC
TOP
DOWN
OFF AUTO
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
battery voltage
26.0
high volts
29.0 Vdc
DOWN INC
DEC
TOP
DOWN
INC
DEC
ADV/DC/AUXCONTROL
ADV/DC/CHARGE
low volts
22.0 Vdc
parameters met time
1 minutes
DOWN
INC
DEC
DOWN INC
DEC
TOP
ADV/DC/CHARGE
ADV/DC/AUXCONTROL
charge factor
93%
SOC high
90%
DOWN INC
DEC
TOP
DOWN
INC
DEC
ADV/DC/AUXCONTROL
ADV/DC/CHARGE
SOC low
59%
charge parameters
complete
DOWN
INC
DEC
TOP
ADV
MAIN
ADV/DC/AUXCONTROL
high set point delay
1 minutes
DOWN
INC
DEC
ADV/DC/PG3---------P03
choose category
PG2 RESET
CLR
MAIN
ADV/DC/RESET-------P03
ADV/DC/CLEAR
reset DC to factory
clear data log
defaults?
memory?
ON
NO
YES
TOP
YES
TOP
TOP
ADV/DC/AUXCONTROL
low set point delay
1 minutes
TOP
DOWN
INC
DEC
TOP
ADV/DC/AUXCONTROL
invert logic YES
TOP
DOWN
YES
NO
TOP
ADV/DC/AUXCONTROL
aux parameters
complete
TOP
TOP
ADV
MAIN
NO
TOP
MAIN--------------------
3:02:14P
SUM STATUS SETUP
ADV
Page 10