Axis 5800 Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Axis 5800. Axis 5800 13 pagina's. Axis communications print server product brochure
Ook voor Axis 5800: Specificatie (6 pagina's)

Pagina afdrukken

Step

UNIX/Linux only: Set the IP Address Manually

If you succeeded in logging in to your print server's web pages in Step 2, your print server has

already received a valid IP address. Skip to " Configure a Printer " (Step 4)!

Set the IP address:

1. Type the following commands in the shell window:

2. The host will return ps5800 is alive , or a similar message. This indicates that the

address has been set and that communication is established. You are now ready to print

using FTP or Reverse Telnet.

Notes:

The ability to set the IP address with arp and ping will only be enabled the first ten

minutes after re-booting the print server

DHCP, RARP and BOOTP can be used to set the IP address in UNIX, see the AXIS 5800

Mobile User's Manual for details.

You need root privileges on your UNIX system in order to execute the arp command and

run axinstall.

When you execute the ping command for the first time, you may experience a

significantly longer response time than usual.

The arp command varies between different UNIX systems.

Some BSD type systems expect the host name and node address in reverse order.

Furthermore IBM AIX systems will require the additional argument ether.

Example:

arp -s ether <host name> <Ethernet address> temp

arp -s <host name> <Ethernet address>

ping <host name>

(You can replace the host name with the IP address)

Example:

arp -s PS5800 00:40:8c:10:00:86

ping ps5800