Axis 5800 Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Axis 5800. Axis 5800 13 pagina's. Axis communications print server product brochure
Ook voor Axis 5800: Specificatie (6 pagina's)

Pagina afdrukken

Configure a Printer in UNIX/Linux over TCP/IP

Install Software: axinstall script

The axinstall script is an installation and management utility for print servers. With this

automatic installation script, the printer connected to the Axis print server will appear as

though it is directly connected to the host print spooler. If you want to integrate your AXIS

5800 Mobile into your host spooler, you can use the Axis installation script axinstall, or

perform a manual integration.

1. Download axinstall to your host using FTP by logging in to the AXIS 5800 Mobile and typ-

ing: ftp <host name> or ftp <IP address> in the UNIX shell window.

2. Enter root as the default user id and pass as the default Administrator password.

3. Download the axinstall script by typing:

get axinstall (When downloading axinstall, make sure you use the ascii transfer

mode).

4. Make the axinstall script executable.

5. Install the AXIS 5800 Mobile using the axinstall script. Type the command in the UNIX

shell window:

sh axinstall

6. Follow the instructions that appear when the script is started.

Note:

LPRng is not supported by axinstall.

You have now completed the installation of the AXIS 5800 Mobile in a UNIX/Linux cable

network.

Configure a Printer in Macintosh:

Configuring a printer is done from the Chooser:

1. Open the Chooser from the Apple menu.

2. Click the LaserWriter, alternatively the LaserWriter 8.0 icon.

3. If your network has more than one zone, click the name of the default zone. If your net-

work has no zones, this box does not appear.

4. Click the name of the printer port you want to use. The default printer name is shown as:

AXIS<nnnnnn>_<port>, where <nnnnnn> is the last six digits of the serial number, and

<port> is LPT1 or LPT2.

5. For LaserWriter 8.0 printer driver only: Click Setup..., and then select Auto Setup. If the

printer and the print server support bi-directional printing, the installation will be per-

formed automatically. If not, you will be prompted to select a PPD file matching your

printer. Click OK and click the Close box. This completes the configuration. Repeat this

procedure for each Macintosh client using the AXIS 5800 Mobile.

Notes:

Basic configuration in AppleTalk is performed simply by opening the Chooser window and

selecting a printer.

You can change the default name of your Axis print server or any default parameters by

editing the config file. See the AXIS 5800 Mobile User's Manual for details.

You have now completed the installation of the AXIS 5800 Mobile in a Macintosh cable

network.