DieHard 200.71225 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DieHard 200.71225. DieHard 200.71225 20 pagina's. Microprocessor controlled, fully automatic operation battery charger with engine starter plus battery and alternator tester for 6 and 12-volt batteries
Ook voor DieHard 200.71225: Gebruikershandleiding (17 pagina's)

Pagina afdrukken

BATTERY CHARgINg - AC CONNECTIONS

8.1

For all grounded cord-connected battery chargers with an input rat-

ing less than 15 amperes and intended for use on a nominal 120-volt

circuit:

•

This battery charger is for use on a nominal 120-volt circuit, and has a

grounding plug that looks like the plug illustrated in sketch A in Figure

8.3. A temporary adapter, which looks like the adapter illustrated in

sketches B and C, may be used to connect this plug to a two-pole recep-

tacle as shown in sketch B if a properly grounded outlet is not available.

The temporary adapter should be used only until a properly grounded

outlet can be installed by a qualified electrician.

dANgER – Before using adapter as illustrated, be certain that center

screw of outlet plate is grounded. The green-colored rigid ear or lug ex

tending from adapter must be connected to a properly grounded outlet–

make certain it is grounded. If necessary, replace original outlet cover

plate screw with a longer screw that will secure adapter ear or lug to

outlet cover plate and make ground connection to grounded outlet.

•