Acculaim Dyna Drum HO Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acculaim Dyna Drum HO. Acculaim Dyna Drum HO 20 pagina's.

Further information

No light output is visible when expected.

• Check that power is correctly applied to the fixture and that there is no damage to the

power input cord.

• Use the menu to perform an emitter test.

• Use the menu to check the internal temperature of the fixture.

• If external DMX control is being used, check that the DMX address set within the fixture

matches that being output by the controlling source device.

• If external DMX control is being used, check the DMX output near to the source to

confirm a valid signal is being originated. When a valid DMX input is attached to the Dyna

Drum HO fixture, the user display will show the configured DMX address.

• If external DMX control is being used, check that the DMX + (hot) and DMX - (cold) lines

have not been crossed.

• If solo mode is being used, check that the static color, white-only output or color chase

has been correctly programmed and that the appropriate solo mode is selected (see

pages 11 and 12).