Acculaim Dyna Drum HO Manual do utilizador - Página 17

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Acculaim Dyna Drum HO. Acculaim Dyna Drum HO 20 páginas.

Further information

No light output is visible when expected.

• Check that power is correctly applied to the fixture and that there is no damage to the

power input cord.

• Use the menu to perform an emitter test.

• Use the menu to check the internal temperature of the fixture.

• If external DMX control is being used, check that the DMX address set within the fixture

matches that being output by the controlling source device.

• If external DMX control is being used, check the DMX output near to the source to

confirm a valid signal is being originated. When a valid DMX input is attached to the Dyna

Drum HO fixture, the user display will show the configured DMX address.

• If external DMX control is being used, check that the DMX + (hot) and DMX - (cold) lines

have not been crossed.

• If solo mode is being used, check that the static color, white-only output or color chase

has been correctly programmed and that the appropriate solo mode is selected (see

pages 11 and 12).