Olympus CAMEDIA C-2100 Ultra Zoom Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Olympus CAMEDIA C-2100 Ultra Zoom. Olympus CAMEDIA C-2100 Ultra Zoom 2 pagina's. Olympus corporation camcorder/digital camera quick start guide

http://www.olympus-europa.com
2

Taking pictures

Taking still pictures
1. Set the Mode dial to P.
2. Compose the picture by turning the
camera towards the subject and adjusting
the AF target mark until you can see it
clearly in the Viewfinder.
Press
to select whether to display your image
on the Monitor or the Viewfinder.
[To enlarge your subject]
Press the Zoom lever toward "T" to enlarge your subject. To return to normal
magnification, press the Zoom lever back toward "W".
3. Press the Shutter button halfway to focus.
The AF confirmation mark lights up in green in the
upper left corner and the camera beeps. Focus
and exposure (shutter speed/aperture) become
locked.
If the AF confirmation mark blinks, then the camera
is out of focus. If this happens, release the Shutter
button and move the camera slightly until you see
the AF target mark clearly. Then, press the shutter
button halfway again.
4. Press the Shutter button fully to take a
picture.
The camera beeps when the shutter is
released.
The free part of the memory gauge lights up and
the card access lamp blinks while the picture is
being recorded.
Continuous shooting is available even if the card
Memory gauge
access lamp is blinking, unless the entire memory
gauge is lit.
If you are taking a picture in a dark environment,
the built-in flash will fire automatically if it has been
popped up.
Taking movie pictures
1. Set the Mode dial to
.
The maximum available recording time appears on the Viewfinder.
2. Press the Shutter button halfway to start movie recording and press it
again halfway to stop.
The card access lamp blinks while the picture is being recorded.
Continuous shooting is available when the card access lamp stops blinking.
C-2100 Ultra Zoom
Quick-Start Guide
Control panel indications
Full-time AF
Viewfinder
P F2.8 1/30
0.0
AF system
Manual focus
AF target mark
Metering mode
Stabilizer
Exposure compensation
Press
Press
halfway
fully
3
AF confirmation mark

Displaying pictures

P F2.8 1/800 0.0
Set the Mode dial to
The last picture taken is displayed.
AF target mark
● Use the Arrow pad to select the desired picture for display.
: Displays next picture.
: Displays preceding picture.
: Jumps to the picture 10 frames ahead.
: Jumps to the picture 10 frames behind.
P F2.8 1/800 0.0
* Press the Zoom lever toward "W" to display multiple
pictures at the same time (Index-display).
* Press the Zoom lever toward "T" to display a close-up.
[Movie pictures]
Card access
will appear with pictures that can be displayed as movies.
lamp
(1) Press
to display the Menu.
(2) Select "MOVIE PLAY" and press
(3) When "START" appears, press the OK button.
The card access lamp blinks for a moment, then the movie starts.
(4) Press
when you are finished watching. The Menu reappears. Press
exit the Menu.
Flash intensity
control
Slow shutter
synchronization flash
Card error
Card writing
Flash mode
Battery check
Auto
Sound
Macro mode
bracket
record
White balance
Self-timer/
Remote control
ISO
Number of storable
still pictures
AE memory
Sequential
Seconds that movies
shooting
can be shot
Record mode
.
10
23.12. , 00 21:56
Still picture display (1-frame)
Arrow pad
1234
1235
1237
1238
1240
1241
Index-display
on the Arrow pad.
again to
● Use the Arrow pad to select the desired picture for display.
: Plays movie pictures when held down continuously.
: Plays movie pictures in reverse when held down
continuously.
: Jumps to the beginning of the movie.
: Jumps to the end of the movie.
● Press OK to pause the movie.
4

Erasing pictures

Unwanted images can be erased. You can erase one frame or all frames,
depending on your requirements.
To erase an unwanted image, first display it on the screen as described
in "
3
Displaying pictures" on this page.
1-frame erase
Press the
button on the camera and
select "YES" on the confirmation screen
using the Arrow pad. Then, press OK.
All-frame erase
Press
, then select "CARD SETUP"—"
OK. Select "YES" on the confirmation screen, then press OK again.
(To cancel, select "NO", then press OK.)
HQ
FUNCTION
CARD
SETUP
MODE
10
SETUP
[
1 / 1
]
1 2 3 4
Erasing a still picture
5
1236

Turning off the power

1239
1242
When you are finished using the camera, turn the power off after
checking that the card access lamp is not on.
● The picture on the screen will disappear when you turn the power off.
● If no operation is performed for 1 minute or more, the image on the screen goes off
automatically to avoid battery exhaustion (this function is called Sleep). To end Sleep,
perform any operation on your camera.
● When you store the camera, make sure to put the lens cap on.
MOVIE
START
PLAY
FUNCTION
CARD
SETUP
MODE
SETUP
[
1 / 1
]
SQ
[
]
YES
NO
Confirmation screen
" using the Arrow pad. Press
[
]
YES
NO
Confirmation screen
Printed in Japan