Olympus CAMEDIA C-2100 Ultra Zoom Hızlı Başlangıç Kılavuzu - Sayfa 2

Dijital Kamera Olympus CAMEDIA C-2100 Ultra Zoom için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Olympus CAMEDIA C-2100 Ultra Zoom 2 sayfaları. Olympus corporation camcorder/digital camera quick start guide

Sayfayı Yazdır

http://www.olympus-europa.com

Taking pictures

Taking still pictures

1. Set the Mode dial to P.

2. Compose the picture by turning the

camera towards the subject and adjusting

the AF target mark until you can see it

clearly in the Viewfinder.

Press

to select whether to display your image

on the Monitor or the Viewfinder.

[To enlarge your subject]

Press the Zoom lever toward "T" to enlarge your subject. To return to normal

magnification, press the Zoom lever back toward "W".

3. Press the Shutter button halfway to focus.

The AF confirmation mark lights up in green in the

upper left corner and the camera beeps. Focus

and exposure (shutter speed/aperture) become

locked.

If the AF confirmation mark blinks, then the camera

is out of focus. If this happens, release the Shutter

button and move the camera slightly until you see

the AF target mark clearly. Then, press the shutter

button halfway again.

4. Press the Shutter button fully to take a

picture.

The camera beeps when the shutter is

released.

The free part of the memory gauge lights up and

the card access lamp blinks while the picture is

being recorded.

Continuous shooting is available even if the card

Memory gauge

access lamp is blinking, unless the entire memory

gauge is lit.

If you are taking a picture in a dark environment,

the built-in flash will fire automatically if it has been

popped up.

Taking movie pictures

1. Set the Mode dial to

The maximum available recording time appears on the Viewfinder.

2. Press the Shutter button halfway to start movie recording and press it

again halfway to stop.

The card access lamp blinks while the picture is being recorded.

Continuous shooting is available when the card access lamp stops blinking.

C-2100 Ultra Zoom

Quick-Start Guide

Control panel indications

Full-time AF

Viewfinder

P F2.8 1/30

0.0

AF system

Manual focus

AF target mark

Metering mode

Stabilizer

Exposure compensation

Press

halfway

fully

AF confirmation mark

Displaying pictures

P F2.8 1/800 0.0

Set the Mode dial to

The last picture taken is displayed.

AF target mark

● Use the Arrow pad to select the desired picture for display.

: Displays next picture.

: Displays preceding picture.

: Jumps to the picture 10 frames ahead.

: Jumps to the picture 10 frames behind.

P F2.8 1/800 0.0

* Press the Zoom lever toward "W" to display multiple

pictures at the same time (Index-display).

* Press the Zoom lever toward "T" to display a close-up.

[Movie pictures]

Card access

will appear with pictures that can be displayed as movies.

lamp

(1) Press

to display the Menu.

(2) Select "MOVIE PLAY" and press

(3) When "START" appears, press the OK button.

The card access lamp blinks for a moment, then the movie starts.

(4) Press

when you are finished watching. The Menu reappears. Press

exit the Menu.

Flash intensity

control

Slow shutter

synchronization flash

Card error

Card writing

Flash mode

Battery check

Auto

Sound

Macro mode

bracket

record

White balance

Self-timer/

Remote control

ISO

Number of storable

still pictures

AE memory

Sequential

Seconds that movies

shooting

can be shot

Record mode

23.12. , 00 21:56

Still picture display (1-frame)

Arrow pad

1234

1235

1237

1238

1240

1241

Index-display

on the Arrow pad.

again to

● Use the Arrow pad to select the desired picture for display.

: Plays movie pictures when held down continuously.

: Plays movie pictures in reverse when held down

continuously.

: Jumps to the beginning of the movie.

: Jumps to the end of the movie.

● Press OK to pause the movie.

Erasing pictures

Unwanted images can be erased. You can erase one frame or all frames,

depending on your requirements.

To erase an unwanted image, first display it on the screen as described

in "

Displaying pictures" on this page.

1-frame erase

Press the

button on the camera and

select "YES" on the confirmation screen

using the Arrow pad. Then, press OK.

All-frame erase

Press

, then select "CARD SETUP"—"

OK. Select "YES" on the confirmation screen, then press OK again.

(To cancel, select "NO", then press OK.)

FUNCTION

CARD

SETUP

MODE

SETUP

[

1 / 1

]

1 2 3 4

Erasing a still picture

1236

Turning off the power

1239

1242

When you are finished using the camera, turn the power off after

checking that the card access lamp is not on.

● The picture on the screen will disappear when you turn the power off.

● If no operation is performed for 1 minute or more, the image on the screen goes off

automatically to avoid battery exhaustion (this function is called Sleep). To end Sleep,

perform any operation on your camera.

● When you store the camera, make sure to put the lens cap on.

MOVIE

START

PLAY

FUNCTION

CARD

SETUP

MODE

SETUP

[

1 / 1

]

[

]

YES

Confirmation screen

" using the Arrow pad. Press

[

]

YES

Confirmation screen

Printed in Japan