Olympus BH2 Series Demontage, reiniging en hermontage - Pagina 33

Blader online of download pdf Demontage, reiniging en hermontage voor {categorie_naam} Olympus BH2 Series. Olympus BH2 Series 45 pagina's. Phase contrast
Ook voor Olympus BH2 Series: Handleiding voor probleemoplossing en afstelling (46 pagina's), Volledige demontage, reiniging en hermontage (23 pagina's), Volledige demontage, reiniging en hermontage (40 pagina's), Handmatig (6 pagina's), Installatiehandleiding (9 pagina's)

lens to fall out, being very careful so as to not scratch

the lens on the metal barrel in the process.

Figure 133 – Remove the glass collector lens

Use a suitable lens spanner tool (item 8 of

to loosen and remove the lower retaining ring from

within the metal barrel (see

Figure

136).

Figure 134 – The lower retaining ring in the barrel

Figure 135 – Loosen the lower retaining ring

Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames

Appendix

Figure

134,

Figure

135, and

Figure 136 – Remove the lower retaining ring

Use a suitable lens suction tool (item 9 of

to carefully lift and remove the lower frosted glass disk

from within the metal barrel (see

Figure 137 – Carefully remove lower glass diffusion disk

Clean Components of Light Inlet Assembly (BHT/BHTU)

Use a suitable lens-cleaning solution (item 4 of

Appendix

1) and dust-free, non-abrasive optical wipes

(item 5 of

Appendix

components of the Light Inlet Assembly.

Use a suitable lens suction tool (item 9 of

to carefully lift and place the lower glass diffusion disk

into the lower recess in the metal barrel (see

138).

Figure 138 – Place lower diffuser in the recess in barrel

Appendix

Figure

137).

1) to clean the various optical

Appendix

Revision 1

Page 33 of 45

Figure