Olympus Fluoview FV1000 Gebruikershandleiding - Pagina 23
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Olympus Fluoview FV1000. Olympus Fluoview FV1000 42 pagina's. Confocal microscope
Ook voor Olympus Fluoview FV1000: Overzicht (28 pagina's), Korte instructies (7 pagina's), Korte instructies (7 pagina's), Gebruikershandleiding (9 pagina's), Manuallijnen (3 pagina's)
![Olympus Fluoview FV1000 Gebruikershandleiding](/uploads/products/server2/4283165/4283165.jpg)
1-2 Starting the Software
NOTE
1. Enter the user name and password to log in the Windows.
FV10-ASW
2. Double-click the [FLUOVIEW] icon on the desktop.
[FLUOVIEW] icon
FV10-SW
[FLUOVIEW] icon
Turn on the microscope and power supply units before starting this
software.
NOTE
If you are [FV10-SW] user, don't double click the [FLUOVIEW Setup]
icon on the desktop and boot it up while the FLUOVIEW software is
running.
NOTE
Log in using the user name given the Administrator's authority.
TIP
If more than one user uses the FV1000, each user should personally log in
personally. For details, refer to Appendix E, "USER REGISTRATION OF
FV1000" in Volume [OPERATION INSTRUCTIONS].
TIP
It takes 20 to 30 seconds after the [FLUOVIEW] icon is double-clicked till
the software starts up.
NOTE
Images cannot be observed if the manual shutter of the fluorescence
mirror unit is close. In this case, slide the shutter to the open
position.
Preparation for Operation
II. PREPARATION For OPERATION
Page
/ Starting the Software
II. 1 - 3