Olympus Fluoview FV1000 Korte instructies - Pagina 4
Blader online of download pdf Korte instructies voor {categorie_naam} Olympus Fluoview FV1000. Olympus Fluoview FV1000 7 pagina's. Confocal microscope
Ook voor Olympus Fluoview FV1000: Overzicht (28 pagina's), Gebruikershandleiding (42 pagina's), Korte instructies (7 pagina's), Gebruikershandleiding (9 pagina's), Manuallijnen (3 pagina's)
Pagina afdrukken
Olympus FV1000
5. Changing objectives:
Never change the objectives manually!
To change objectives use the microscope control menu within the Olympus
software or the panel box left of the microscope stand.
6. Changing the specimen:
Before you change the specimen, drive down the objective nosepiece.
Don't forget to remove the old oil from the objective before you add new ones.
7. Lasers:
Lasers for the lines 491, 532, and 559 nm have to be switched on manually. Read
chapter 3 for details.
8. Data transfer:
Never store any data on the microscope computer.
There are three ways to transfer your data from the microscope computer:
a. Transfer through the MHH network. Save your data on hard disk P: of your
department.
b. USB-sticks or movable hard disks connected via USB. The USB sockets are
located at the back of the computer.´
c. Writable CDs. This computer supports only CD-R, -RW. Other formats will
not be recognized. Open the Nero Start Smart software and follow the
instructions.
-4-
Short instructions