Olympus Fluoview FV1000 Krótkie instrukcje - Strona 4

Przeglądaj online lub pobierz pdf Krótkie instrukcje dla Mikroskop Olympus Fluoview FV1000. Olympus Fluoview FV1000 7 stron. Confocal microscope
Również dla Olympus Fluoview FV1000: Przegląd (28 strony), Podręcznik użytkownika (42 strony), Krótkie instrukcje (7 strony), Podręcznik użytkownika (9 strony), Manuallines (3 strony)

Olympus FV1000

5. Changing objectives:

Never change the objectives manually!

To change objectives use the microscope control menu within the Olympus

software or the panel box left of the microscope stand.

6. Changing the specimen:

Before you change the specimen, drive down the objective nosepiece.

Don't forget to remove the old oil from the objective before you add new ones.

7. Lasers:

Lasers for the lines 491, 532, and 559 nm have to be switched on manually. Read

chapter 3 for details.

8. Data transfer:

Never store any data on the microscope computer.

There are three ways to transfer your data from the microscope computer:

a. Transfer through the MHH network. Save your data on hard disk P: of your

department.

b. USB-sticks or movable hard disks connected via USB. The USB sockets are

located at the back of the computer.´

c. Writable CDs. This computer supports only CD-R, -RW. Other formats will

not be recognized. Open the Nero Start Smart software and follow the

instructions.

-4-

Short instructions