Olympus MX61L Montagehandleiding - Pagina 37

Blader online of download pdf Montagehandleiding voor {categorie_naam} Olympus MX61L. Olympus MX61L 49 pagina's. 200mm/300mm compatible semiconductor/fpd inspection microscopes

Pagina afdrukken

Objective/Aperture Iris Switching

Functions

1. Rotates the objective in the specified revolving nosepiece position in the optical axis and also sets the aperture iris

diaphragm to the specified position.

2. When this command is sent during brightfield observation, the aperture iris diaphragm is set to the position specified with

the AS PRESET switch.

3. When this command is sent during darkfield observation, the aperture iris diaphragm is set to the open position.

4. When this command is sent during darkfield observation for which the glare prevention is set, the aperture iris diaphragm,

is closed, the revolving nosepiece is rotated and, after completing the rotation, the aperture iris diaphragm is opened.

Special notes

1. When this command is sent during brightfield observation, the revolving nosepiece and aperture iris diaphragm are

operated simultaneously, and the response is returned when both operations have completed.

2. If the request command for a 6-position is issued while a 5-position revolving nosepiece is used, an illegal parameter

error will occur.

3. Even when multiple errors occur, the error code for only one error is returned.

Command descriptions

Command

Type

1OBA

Request

(1 to 6 when a 6-

position nose-

piece is used, or

1 to 5 when a 5-

position nose-

piece is used)

)

" represents a space.

Line feed command <CR><LF> is required after commands and line feed command <CR><LF> are added after any

response.

Description

Response

Rotation of the revolv-

1OBA

ing nosepiece posi-

tion (objective) with

the number specified

1OBA

with "n" in the optical

axis, plus setting of

1OBA

the aperture iris dia-

phragm to the posi-

tion specified with the

AS PRESET switch.

1OBA

Result

Successful

The specified revolving nose-

piece position is engaged in the

optical axis.

!,E11214

Error

It cannot be engaged in the op-

tical axis due to a time-out error.

!,E01130

Error

The nosepiece is not connected

or the connected nosepiece is

not the designated model.

!,E11218

Error

An abnormality with the nose-

piece.

!,E11278

Error

The connection is disconnected

due to an abnormality with the

aperture iris diaphragm.

!,E01120

Error

A number or string other than "1"

to "6" is sent as "n".

MX61/MX61L

1OBA

Description