Olympus CIX100 Gebruiksaanwijzing - Pagina 33

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Olympus CIX100. Olympus CIX100 46 pagina's. Cleanliness inspector system
Ook voor Olympus CIX100: Handleiding systeeminstellingen (38 pagina's), Installatiehandleiding (14 pagina's)

Pagina afdrukken

Performing an inspection with different sample types with a

CIX100 system

Before starting an inspection with a sample type other than uncovered membrane,

please make sure that all steps listed in this manual have been followed carefully,

i.e. [Shading Correction] and [White Balance] calibration have been performed for

each observation method.

Here, only the steps in a standard inspection configuration are explained which are

specific when new sample types have been added to the system. For all other

functionality of your CIX100 software, please refer to the CIX ASW software's help.

1. Start a sample inspection.

2. If you want to change the sample, select [Move Stage to Mounting Position].

CAUTION - Stage and objectives will be moving!

3. Mount your sample. Be careful to only mount samples suitable for the stage

limit calibration that was calibrated before, i.e. the sample must not hit the

objective during the stage movement back to the initial inspection position.

Sample Holders