Axminster UE-125DV Bedieningshandleiding - Pagina 10

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Axminster UE-125DV. Axminster UE-125DV 16 pagina's. Portable bandsaw machine

Pagina afdrukken

Angle Cutting

The machine uses a swivel miter base for angle
cutting from 0 ~60 degree. On the sawing arm,
there is an attached scale (Q) in Fig.7. This
machine is preset zero degree before leaving
the factory. Angle cutting is adjusted as follows.
1.
Loosen handle (R) Fig.7 to release the arm.
2.
Move this swivel arm forward along the
scale to search a right index for the work to
be cut.
3.
If the pointer matches the right index on the
scale. Tighten the handle, and a perfect
angle cut will be given.
Q
WARNING
Disconnect machine from the power source!
No matter when, where, or how. Pay extra
attention to the saw during it in transportation,
operation, and maintenance. Or adjustment.
Failure to comply may cause serious injury!

Changing Blade

1.
Raise this saw head up-to proper position
by lifting up the arm Fig. 8.
Fig. 7
Fig. 8
2.
Remove the blade guard by loosening two
screws (U) in Fig. 9 on the saw frame.
U
3.
Remove blade cover by loosening four
screws (V) in Fig.10 on the saw frame.
R
V
4.
Turn the blade tension wheel W in Fig.11,
Counter-clockwise let the blade slip off.
- 8 -
Fig. 9
Fig. 10
W
Fig. 11