Axminster UE-125DV Kullanım Kılavuzu - Sayfa 10

Testere Axminster UE-125DV için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Axminster UE-125DV 16 sayfaları. Portable bandsaw machine

Angle Cutting

The machine uses a swivel miter base for angle

cutting from 0 ~60 degree. On the sawing arm,

there is an attached scale (Q) in Fig.7. This

machine is preset zero degree before leaving

the factory. Angle cutting is adjusted as follows.

Loosen handle (R) Fig.7 to release the arm.

Move this swivel arm forward along the

scale to search a right index for the work to

be cut.

If the pointer matches the right index on the

scale. Tighten the handle, and a perfect

angle cut will be given.

WARNING

Disconnect machine from the power source!

No matter when, where, or how. Pay extra

attention to the saw during it in transportation,

operation, and maintenance. Or adjustment.

Failure to comply may cause serious injury!

Raise this saw head up-to proper position

by lifting up the arm Fig. 8.

Fig. 7

Fig. 8

Remove the blade guard by loosening two

screws (U) in Fig. 9 on the saw frame.

Remove blade cover by loosening four

screws (V) in Fig.10 on the saw frame.

Turn the blade tension wheel W in Fig.11,

Counter-clockwise let the blade slip off.

- 8 -

Fig. 9

Fig. 10

Fig. 11