Alphacom Regency 605 Gebruikershandleiding - Pagina 16
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alphacom Regency 605. Alphacom Regency 605 18 pagina's. Regency range headsetphone
Pagina afdrukken14.
Operating Procedure for PBX Connection
The Regency 605 Headsetphone is suitable for connection to a pAbX which returns
secondary proceed indication.
14.1
PBX RECAll
When connected to a pbX, the telephone will send a Recall Signal to
the exchange when the RECALL button is pressed. This Regency 605
Headsetphone provides either TIMED LINE bREAK RECALL or EARTH
RECALL. Consult your pbX supplier or maintainer to ascertain which is
compatible with your pbX. Having established which you require select
either ELR (Earth Recall) or TbR (Timed Line break Recall) using the ELR/
TbR switch.
Nb. Like the mute key the Recall key is a 'hard switch' not a 'soft press'
key. This means that it will only depress slightly, and will remain depressed
until released.
14.2
PBX PAUSE FACIlITy
On pAbX systems which provide secondary proceed indication you must
wait for the secondary proceed dial tone after dialling the initial access
digit(s), normally 9 for an outside line. for correct operation of the Memory
facilities it is therefore necessary to store a pause after the access digit to
ensure correct dialling. pressing the LNR key automatically inserts a 3.6
second pause in the dialling sequence.
Nb: Do not enter more than 3 consecutive pauses. failure to comply with
this may result in unsatisfactory operation and will invalidate the approval.
14.3
MESSAGE WAITING OPERATION
On 4 wire systems set the switch to MW1 to enable message waiting on
compatible systems. for 6 wire systems set the switches to MW2. Only
one message waiting telephone may be connected to an extension. If more
than one message waiting telephone is connected to a line, the system may
interpret this as an off hook condition.
14.4
GENERAl USE
It must be noted that there is no guarantee of correct working of this
telephone in all circumstances when connected to a PBX. Any difficulties
should be referred to the telephone supplier.
This telephone is approved for connection to most pbX's.
The supplier of this telephone should be consulted for an up to date list of
pbX's with which this telephone is compatible.
14