AlphaESS SMILE-G3-EVCT11 Installatie-, bedienings- en onderhoudshandleiding - Pagina 9

Blader online of download pdf Installatie-, bedienings- en onderhoudshandleiding voor {categorie_naam} AlphaESS SMILE-G3-EVCT11. AlphaESS SMILE-G3-EVCT11 14 pagina's.

Pagina afdrukken

SYSTEM CONFIGURATION AND OPERATION

4.2 Setup on the AlphaCloud and App
After configuration, the end user can monitor and set up the EV charger on the AlphaCloud
and App.
We have three charging strategies: Manual Setting, Timed Charging, Plug and Play.
Each strategy has four charging modes to choose from:
1. Green charge-slow charge
2. Green charge-general charge
3. Green charge-quick charge
4. Specific power charge mode
NOTE: Regardless of the chosen charging strategy, the charging mode
depends on what you have chosen.
13
14
4.2.1 Manual Setting
To charge the electric vehicle immediately, please click the "start" button or use the RFID
card after setting up the charging mode.
To stop the EV charger from charging, please click the "stop" button.
4.2.2 Timed Charging
You can also set two charging time periods for the EV charger.
4.2.3 Plug and Play Strategy
When the "Plug and Play" strategy is selected, the EV charger will start charging as soon
as the connecter is plugged in, and stop charging when the connecter is unplugged.
There is no need to swipe a card or control through AlphaCloud & App.
In this function, the Charging mode and the phase of OBC are needed to be set.
4.2.4 Charging Mode Instruction
NOTE: To start the EV charger, the current of each phase should not be less
than 6A.
SYSTEM CONFIGURATION AND OPERATION