Axxera Axxera CD Receiver Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Axxera Axxera CD Receiver. Axxera Axxera CD Receiver 1 pagina's.
CD RECEIVER
Quick Start Guide
This Quick Start Guide provides basic instructions
for using your Axxera Receiver.
To download the complete Owner's Manual please visit
www.axxeraaudio.com/support/manuals.php
and type in the product's model number
or call customer service at 1-866-382-5476.
General Operation
Power On/Off
Press the
button to turn the unit on. Press
again to turn unit off.
Faceplate
If equipped, press the release button and pull away
Removal
from the left side to remove. To re-install, insert
right side of faceplate first then push left side to
secure.
Changing
Press MODE or SOURCE to cycle through available
Modes
operating modes.
Volume
Adjust volume using volume knob.
Mute
Press
to silence the audio. Press
resume listening at the previously selected volume.
Auxiliary Input
Insert a 3.5mm connector in the unit's AUX port.
Reset
Press the RESET button to reset the unit back to
the factory settings if abnormal operation occurs.
The reset button is located behind the front panel.
Setting the
With the unit on, press and hold DISP until the
Clock
clock begins to flash, then release. Press TUNE
nn
to adjust the hours and TUNE
the minutes. Press DISP momentarily to save the
selected time.
Display
Press DISP to toggle display between different
types of displayed information.
To download the complete Owner's Manual for your radio,
please visit www.axxeraaudio.com/support/manuals.php.
MP3 / WMA Operation
Playing MP3/
To play MP3/WMA files, insert a disc or USB device
WMA Files
containing MP3/WMA files.
ll
Track Select
Press TUNE
to skip to the beginning of the next
nn
song. Press TUNE
to return to the beginning of the
current song. Pressing TUNE
beginning of the previous song.
ll
Fast Forward
Press and hold TUNE
and Reverse
or reverse a track.
l
/
II to temporarily stop playback. Press
Pause
Press
again to resume playback.
Folder Access
Press
to select the next folder. Press
previous folder. Folder access is only available on discs or
devices with more than one folder.
Repeat
Press RPT to choose between:
• Current Song - Continuously repeats selected track.
• Current Folder - Continuously repeats all files in folder.
Random
Press RDM to choose between:
• Off - Cancels RDM function.
• All Songs - Plays all tracks in random order.
• Current Folder - Plays all tracks in folder in random
order.
Intro
Press INT to enter the Intro menu, then turn the volume
knob to select one of the following options:
• Off - Cancels the INT function.
• All Songs - Plays first 10 seconds of each track.
• Current Folder - Plays first 10 seconds of each track in
the selected folder.
To download the complete Owner's Manual for your radio,
please visit www.axxeraaudio.com/support/manuals.php.
Before You Start
• Consult a qualified technician for instructions. Axxera always recommends
professional installation.
• Disconnect negative battery terminal.
• Remove trim ring from unit (if installed).
• Remove 2 transit screws located on top of the unit (if applicable).
• Insert the removal keys, and remove the mounting sleeve from the head unit.
Note: Most vehicles require an installation kit, wiring harness or antenna adapter
(all sold separately) to properly install the head unit in the vehicle.
Installation Process
1. Carefully remove the existing head unit.
2. Connect wiring harness. Consult a qualified technician if you are unsure.
3. Mount the head unit using the mounting sleeve or ISO brackets (depending on
your vehicle's dashboard).
4. Connect wiring harness and antenna. Test the head unit for correct operation.
5. Slide into mounting sleeve to secure, or mount the ISO brackets to the vehicle.
6. Snap trim ring into place.
Wiring Connections
The chart below defines the connection for each wire in the wiring harness.
Color
Red
Yellow
Black
Blue
Grey
Grey/Black
White
White/Black
Purple
Purple/Black
Green
Green/Black
Seek Tuning
Manual Tuning
again to
Storing
Station
Presets
Recalling
Station
Presets
ll
to adjust
This warranty gives you specific legal rights. You may also have other rights which
vary from state to state. Dual Electronics Corp. warrants this product to the original
purchaser to be free from defects in material and workmanship for a period of one
year from the date of the original purchase. Dual Electronics Corp. agrees, at our
option, during the warranty period, to repair any defect in material or workmanship
nn
again skips to the
or to furnish an equal new, renewed or comparable product (whichever is deemed
necessary) in exchange without charges, subject to verification of the defect or
malfunction and proof of the date of purchase. Subsequent replacement products are
nn
or TUNE
to fast forward
warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for
l
/
II
products purchased and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this
to select the
product. The following are not covered: installation/removal costs, damage resulting
from accident, misuse, abuse, neglect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure to follow instructions supplied with
the product, or damage occurring during return shipment of the product.
What to do?
1. Before you call for service, check the troubleshooting guide in your owner's manual.
A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product
(preferably in the original package) and ship it by prepaid transportation with a copy
of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS
shipping address (P.O. Box not acceptable), and a daytime phone number with your
shipment.
4. For more information and for the location of the nearest authorized service center
please contact us toll-free at 1-866-382-5476 or by email at [email protected].
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and
all other warranties, expressed or implied, including without limitation the implied
warranties of merchantability and fitness for a particular purpose and any obligation,
liability, right, claim or remedy in contract or tort, whether or not arising from the
company's negligence, actual or imputed. No person or representative is authorized to
assume for the company any other liability in connection with the sale of this product. In
no event shall the company be liable for indirect, incidental or consequential damages.
Installation
Connection
12V Ignition / Accessory
Tip:
12V Battery / Memory
When a suitable ground wire is
not present in the vehicle wiring
Ground
harness, connect the black ground
Power Antenna / Amp Turn-on
wire to the vehicle chassis.
Right Front (+)
Right Front (-)
Fuse:
Left Front (+)
When replacing the fuse, make
Left Front (-)
sure new fuse is the correct type
Right Rear (+)
and amperage. Using an incorrect
Right Rear (-)
fuse could damage the radio.
Left Rear (+)
Left Rear (-)
Tuner Operation
nn
ll
Press
TUNE
or
TUNE
one second to seek the next strong station.
nn
ll
Press
TUNE
or
TUNE
move radio frequency up or down one step at a
time. Press and hold to advance quickly.
Band
Press BAND to select between FM1, FM2, FM3,
AM1 and AM2 bands. Up to six presets can be
programmed for each band, enabling up to 18
FM stations and 12 AM stations to be stored in
memory.
To store a station, select the desired band and
station. Press and hold the desired preset button
(1-6) for more than two seconds. When stored, the
preset number will appear in the display.
Stored stations can be recalled instantly by
pressing the corresponding preset button.
To download the complete Owner's Manual for your radio,
please visit www.axxeraaudio.com/support/manuals.php.
Limited One-Year Warranty
Mounting the Head Unit:
Typical DIN mounting
Step 1:
Insert the mounting sleeve into the
installation kit or dashboard.
Step 2:
Bend multiple mounting tabs around
the mounting sleeve until the
mounting sleeve is secure.
Step 3:
Connect all wiring harnesses and
slide the head unit into the mounting
sleeve until it clicks into place.
Mounting the Head Unit:
ISO mounting
Using the existing brackets or the
brackets supplied with the installation
kit, mount the brackets to the sides of
the head unit with the screws supplied
with the head unit.
Insert CD
for more than
momentarily to
Eject CD
Track Select
Fast Forward/
Reverse
Pause
Intro
Repeat
Random
CD-R/CD-RW
Compatibility
To download the complete Owner's Manual for your radio,
please visit www.axxeraaudio.com/support/manuals.php.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
©2013 Dual Electronics Corp. All rights reserved.
Installation
Dashboard or Installation Kit
Mounting Sleeve
Dashboard or Installation Kit
Mounting Sleeve
Mounting Tabs
Dashboard or Installation Kit
Head Unit
New
Decorative
Bezel
Radio
CD Operation
Press the OPEN button to open the front panel.
With the label facing up, insert a standard size CD
into the CD slot. The CD will automatically begin
playback.
Press EJECT to eject the CD. The unit will change
to previous mode of operation.
ll
Press TUNE
to skip to the beginning of the
nn
next track. Press TUNE
to return to the
beginning of the current track. Pressing TUNE
nn
again skips to the beginning of the previous
track.
ll
nn
Press and hold TUNE
or TUNE
forward or reverse a track.
l
/ II to temporarily stop CD playback.
Press
l
/ II again to resume playback.
Press
Press INT to play the first 10 seconds of each
track.
Press RPT to continuously repeat the selected
track.
Press RDM to play all the tracks in random order.
Some CD-Rs and CD-RWs may be incompatible
with this unit, depending on media type and
recording method. Refer to the online owner's
manual for details.
FCC Compliance
Dual Electronics Corp.
Toll Free: 1-866-382-5476
www.axxeraaudio.com
NSA0113-V01
Mounting Sleeve
Existing
Brackets
to fast