Axxera Axxera CD Receiver Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Odbiornik samochodowy Axxera Axxera CD Receiver. Axxera Axxera CD Receiver 1 stron.

Drukuj stronę

CD RECEIVER

Quick Start Guide

This Quick Start Guide provides basic instructions

for using your Axxera Receiver.

To download the complete Owner's Manual please visit

www.axxeraaudio.com/support/manuals.php

and type in the product's model number

or call customer service at 1-866-382-5476.

General Operation

Power On/Off

Press the

button to turn the unit on. Press

again to turn unit off.

Faceplate

If equipped, press the release button and pull away

Removal

from the left side to remove. To re-install, insert

right side of faceplate first then push left side to

secure.

Changing

Press MODE or SOURCE to cycle through available

Modes

operating modes.

Volume

Adjust volume using volume knob.

Mute

Press

to silence the audio. Press

resume listening at the previously selected volume.

Auxiliary Input

Insert a 3.5mm connector in the unit's AUX port.

Reset

Press the RESET button to reset the unit back to

the factory settings if abnormal operation occurs.

The reset button is located behind the front panel.

Setting the

With the unit on, press and hold DISP until the

Clock

clock begins to flash, then release. Press TUNE

to adjust the hours and TUNE

the minutes. Press DISP momentarily to save the

selected time.

Display

Press DISP to toggle display between different

types of displayed information.

To download the complete Owner's Manual for your radio,

please visit www.axxeraaudio.com/support/manuals.php.

MP3 / WMA Operation

Playing MP3/

To play MP3/WMA files, insert a disc or USB device

WMA Files

containing MP3/WMA files.

Track Select

Press TUNE

to skip to the beginning of the next

song. Press TUNE

to return to the beginning of the

current song. Pressing TUNE

beginning of the previous song.

Fast Forward

Press and hold TUNE

and Reverse

or reverse a track.

II to temporarily stop playback. Press

Pause

Press

again to resume playback.

Folder Access

Press

to select the next folder. Press

previous folder. Folder access is only available on discs or

devices with more than one folder.

Repeat

Press RPT to choose between:

• Current Song - Continuously repeats selected track.

• Current Folder - Continuously repeats all files in folder.

Random

Press RDM to choose between:

• Off - Cancels RDM function.

• All Songs - Plays all tracks in random order.

• Current Folder - Plays all tracks in folder in random

order.

Intro

Press INT to enter the Intro menu, then turn the volume

knob to select one of the following options:

• Off - Cancels the INT function.

• All Songs - Plays first 10 seconds of each track.

• Current Folder - Plays first 10 seconds of each track in

the selected folder.

To download the complete Owner's Manual for your radio,

please visit www.axxeraaudio.com/support/manuals.php.

Before You Start

• Consult a qualified technician for instructions. Axxera always recommends

professional installation.

• Disconnect negative battery terminal.

• Remove trim ring from unit (if installed).

• Remove 2 transit screws located on top of the unit (if applicable).

• Insert the removal keys, and remove the mounting sleeve from the head unit.

Note: Most vehicles require an installation kit, wiring harness or antenna adapter

(all sold separately) to properly install the head unit in the vehicle.

Installation Process

1. Carefully remove the existing head unit.

2. Connect wiring harness. Consult a qualified technician if you are unsure.

3. Mount the head unit using the mounting sleeve or ISO brackets (depending on

your vehicle's dashboard).

4. Connect wiring harness and antenna. Test the head unit for correct operation.

5. Slide into mounting sleeve to secure, or mount the ISO brackets to the vehicle.

6. Snap trim ring into place.

Wiring Connections

The chart below defines the connection for each wire in the wiring harness.

Color

Red

Yellow

Black

Blue

Grey

Grey/Black

White

White/Black

Purple

Purple/Black

Green

Green/Black

Seek Tuning

Manual Tuning

again to

Storing

Station

Presets

Recalling

Station

Presets

to adjust

This warranty gives you specific legal rights. You may also have other rights which

vary from state to state. Dual Electronics Corp. warrants this product to the original

purchaser to be free from defects in material and workmanship for a period of one

year from the date of the original purchase. Dual Electronics Corp. agrees, at our

option, during the warranty period, to repair any defect in material or workmanship

again skips to the

or to furnish an equal new, renewed or comparable product (whichever is deemed

necessary) in exchange without charges, subject to verification of the defect or

malfunction and proof of the date of purchase. Subsequent replacement products are

or TUNE

to fast forward

warranted for the balance of the original warranty period.

Who is covered? This warranty is extended to the original retail purchaser for

products purchased and used in the U.S.A.

What is covered? This warranty covers all defects in material and workmanship in this

to select the

product. The following are not covered: installation/removal costs, damage resulting

from accident, misuse, abuse, neglect, product modification, improper installation,

incorrect line voltage, unauthorized repair or failure to follow instructions supplied with

the product, or damage occurring during return shipment of the product.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner's manual.

A slight adjustment of any custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product

(preferably in the original package) and ship it by prepaid transportation with a copy

of the original receipt from the retailer to an authorized service center.

3. Please describe your problem in writing and include your name, a return UPS

shipping address (P.O. Box not acceptable), and a daytime phone number with your

shipment.

4. For more information and for the location of the nearest authorized service center

please contact us toll-free at 1-866-382-5476 or by email at [email protected].

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and

all other warranties, expressed or implied, including without limitation the implied

warranties of merchantability and fitness for a particular purpose and any obligation,

liability, right, claim or remedy in contract or tort, whether or not arising from the

company's negligence, actual or imputed. No person or representative is authorized to

assume for the company any other liability in connection with the sale of this product. In

no event shall the company be liable for indirect, incidental or consequential damages.

Installation

Connection

12V Ignition / Accessory

Tip:

12V Battery / Memory

When a suitable ground wire is

not present in the vehicle wiring

Ground

harness, connect the black ground

Power Antenna / Amp Turn-on

wire to the vehicle chassis.

Right Front (+)

Right Front (-)

Fuse:

Left Front (+)

When replacing the fuse, make

Left Front (-)

sure new fuse is the correct type

Right Rear (+)

and amperage. Using an incorrect

Right Rear (-)

fuse could damage the radio.

Left Rear (+)

Left Rear (-)

Tuner Operation

Press

TUNE

one second to seek the next strong station.

Press

TUNE

move radio frequency up or down one step at a

time. Press and hold to advance quickly.

Band

Press BAND to select between FM1, FM2, FM3,

AM1 and AM2 bands. Up to six presets can be

programmed for each band, enabling up to 18

FM stations and 12 AM stations to be stored in

memory.

To store a station, select the desired band and

station. Press and hold the desired preset button

(1-6) for more than two seconds. When stored, the

preset number will appear in the display.

Stored stations can be recalled instantly by

pressing the corresponding preset button.

To download the complete Owner's Manual for your radio,

please visit www.axxeraaudio.com/support/manuals.php.

Limited One-Year Warranty

Mounting the Head Unit:

Typical DIN mounting

Step 1:

Insert the mounting sleeve into the

installation kit or dashboard.

Step 2:

Bend multiple mounting tabs around

the mounting sleeve until the

mounting sleeve is secure.

Step 3:

Connect all wiring harnesses and

slide the head unit into the mounting

sleeve until it clicks into place.

Mounting the Head Unit:

ISO mounting

Using the existing brackets or the

brackets supplied with the installation

kit, mount the brackets to the sides of

the head unit with the screws supplied

with the head unit.

Insert CD

for more than

momentarily to

Eject CD

Track Select

Fast Forward/

Reverse

Pause

Intro

Repeat

Random

CD-R/CD-RW

Compatibility

To download the complete Owner's Manual for your radio,

please visit www.axxeraaudio.com/support/manuals.php.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user's authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Installation

Dashboard or Installation Kit

Mounting Sleeve

Dashboard or Installation Kit

Mounting Sleeve

Mounting Tabs

Dashboard or Installation Kit

Head Unit

New

Decorative

Bezel

Radio

CD Operation

Press the OPEN button to open the front panel.

With the label facing up, insert a standard size CD

into the CD slot. The CD will automatically begin

playback.

Press EJECT to eject the CD. The unit will change

to previous mode of operation.

Press TUNE

to skip to the beginning of the

next track. Press TUNE

to return to the

beginning of the current track. Pressing TUNE

again skips to the beginning of the previous

track.

Press and hold TUNE

or TUNE

forward or reverse a track.

/ II to temporarily stop CD playback.

Press

/ II again to resume playback.

Press

Press INT to play the first 10 seconds of each

track.

Press RPT to continuously repeat the selected

track.

Press RDM to play all the tracks in random order.

Some CD-Rs and CD-RWs may be incompatible

with this unit, depending on media type and

recording method. Refer to the online owner's

manual for details.

FCC Compliance

Dual Electronics Corp.

Toll Free: 1-866-382-5476

www.axxeraaudio.com

NSA0113-V01

Mounting Sleeve

Existing

Brackets

to fast