ARCCAPTAIN ARC200 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARCCAPTAIN ARC200. ARCCAPTAIN ARC200 15 pagina's. Inverter welding machine

Press the key combination to display the code table

Digital tube display code

-0/ -1

5. INSTALLATION AND OPERATION

Note: Please install the machine strictly according to the following steps.

Turn off the power supply switch before any electric connection operation.

The housing protection grade of this machine is IP21S, so do not use it in rain.

A primary power supply cable is available for this welding machine. Connect the primary power

supply cable to the corresponding voltage class based on rated input power of the welder.

Misconnection should be avoided.

The primary cable should be tightly connected to the corresponding power binding post or socket

to avoid oxidization.

Check whether the input voltage value varies in acceptable range with a multi-meter.

Insert the cable plug with electrode holder into the "+" socket on the front panel of the welding

machine, and tighten it clockwise.

Insert the cable plug with ground clamp into the " － " socket on the front panel of the welding

machine, and tighten it clockwise.

Connect the power ground well.

The connection as mentioned above in 4) and 5) is DCRP connection. Operator can choose DCSP

connection according to workpiece and electrode application requirement. Generally, DCRP connection

is recommended for basic electrode (electrode is connected to positive pole), while there is no special

requirement for acid electrode.

-0:Represents no VRD; -1:Representative has VRD

-0:Represents no anti-stick; -1:Representative has anti-stick

Pic 6 Schematic Diagram of MMA Welding

Code meaning