digico SD10 Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} digico SD10. digico SD10 20 pagina's. Replacing and cleaning faders
Ook voor digico SD10: Handmatig (9 pagina's)
Pagina afdrukken
1.4 Hardware Configuration
1.4.1 Connections ..........................................................................
Detailed information on the various systems of connection is provided in the relevant Appendix but the following diagram provides
an overview of a single console/single rack setup.
All connections should be made before switching on the console and racks.
The console and rack each have dual redundant power supplies and both should be switched on at all times. After switching on
the console the software will be launched automatically and the state of the worksurface and settings should be the same as
when it was last Shut Down.
To Shut Down the console press the System>Shut Down button and wait until you receive a message saying that it is safe to
switch the power off.
The SD10 worksurface has 8 analogue I/O and 8 AES I/O on its rear panel and remote I/O racks are available in several formats.
These racks can be connected to the console with 2x 100M high specification 75Ohm coaxial cables fitted with BNC connectors,
or optical fibre.
In normal operation the MADI connections should be as follows (see diagram below):
Rack MAIN MADI IN connected to the console MADI 1A OUT
Rack MAIN MADI OUT connected to the console MADI 1A IN
Note - Optionally, a second set of MADI cables can be connected to provide MADI redundancy from the
rack's AUX MADI ports to the console's MADI 1B ports
The console's MADI Port 2 can be connected to a MADI recorder or a second DiGiCo Rack or console.
Optional Remote Control
Laptop connection with
Ethernet Crossover Cable
STANDARD CONNECTION WITH MADI
Remote I/O Rack
MAIN MADI
MAIN MADI
OUT
IN
MADI 1A OUT
MADI 1A IN
SD10 Rear Panel MADI Connections
MADI 2B
MADI 2A
MADI 1B
Chapter 1 - Getting Started
AUX MADI
AUX MADI
IN
OUT
Optional
Redundant
MADI
Connection
MADI 1B OUT
MADI 1B IN
MADI 2A IN
MADI 2B OUT
MADI 1A
MADI OUTPUTS
MADI INPUTS
Optional
MADI OUT
MADI Recorder
or
MADI IN
Second I/O Rack
1-9