Epson ActionLaser 1400 Lees deze eerste handleiding - Pagina 14
Blader online of download pdf Lees deze eerste handleiding voor {categorie_naam} Epson ActionLaser 1400. Epson ActionLaser 1400 27 pagina's. Flatbed inkjet printer
Ook voor Epson ActionLaser 1400: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (30 pagina's)
Pagina afdrukken
5 Attaching the power cord
1. Make sure the power switch on the right of the printer is
turned off as shown below.
2. Insert the power cord into the AC receptacle at the back of the
printer. Then plug the other end into a properly grounded outlet.
Use a grounded, three-prong electrical outlet. Do not use an
adapter to fit the three-prong plug into a two-hole outlet.
Avoid using an outlet that is controlled by wall switches or
automatic timers. Accidental disruption of power can wipe
out valuable information in the memory of your computer
or printer. Also avoid outlets on the same circuit with large
motors or appliances that might disturb the power supply.
Setup 21