Epson ActionLaser 1400 Lees deze eerste handleiding - Pagina 15
Blader online of download pdf Lees deze eerste handleiding voor {categorie_naam} Epson ActionLaser 1400. Epson ActionLaser 1400 27 pagina's. Flatbed inkjet printer
Ook voor Epson ActionLaser 1400: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (30 pagina's)
Pagina afdrukken
6 Testing the printer
To test whether the printer is correctly installed, first turn it on.
Then print a test sheet by briefly pressing the reset button at
the back of the printer. The test sheet contains information
about the printer, including the current settings.
7 Connecting the printer to the
computer
1. Turn off the printer and make sure the computer is off.
2. Connect a shielded parallel interface cable to the connector
on the back of the printer. Fasten the connector with the
two wire clips.
3. Connect the other end of the interface cable to the back of
your computer. Tighten the screws on both sides of the
connector.
12
Setup
reset button
interface connector