Epson ActionLaser 1400 Baca Panduan Pertama Ini - Halaman 15
Jelajahi secara online atau unduh pdf Baca Panduan Pertama Ini untuk Printer Epson ActionLaser 1400. Epson ActionLaser 1400 27 halaman. Flatbed inkjet printer
Juga untuk Epson ActionLaser 1400: Panduan Pengguna (8 halaman), Panduan Pengguna (30 halaman)
Halaman Cetak
6 Testing the printer
To test whether the printer is correctly installed, first turn it on.
Then print a test sheet by briefly pressing the reset button at
the back of the printer. The test sheet contains information
about the printer, including the current settings.
7 Connecting the printer to the
computer
1. Turn off the printer and make sure the computer is off.
2. Connect a shielded parallel interface cable to the connector
on the back of the printer. Fasten the connector with the
two wire clips.
3. Connect the other end of the interface cable to the back of
your computer. Tighten the screws on both sides of the
connector.
12
Setup
reset button
interface connector