Epson ActionLaser 1400 Önce Bu Kılavuzu Okuyun - Sayfa 15
Yazıcı Epson ActionLaser 1400 için çevrimiçi göz atın veya pdf Önce Bu Kılavuzu Okuyun indirin. Epson ActionLaser 1400 27 sayfaları. Flatbed inkjet printer
Ayrıca Epson ActionLaser 1400 için: Kullanıcı Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (30 sayfalar)
Sayfayı Yazdır
6 Testing the printer
To test whether the printer is correctly installed, first turn it on.
Then print a test sheet by briefly pressing the reset button at
the back of the printer. The test sheet contains information
about the printer, including the current settings.
7 Connecting the printer to the
computer
1. Turn off the printer and make sure the computer is off.
2. Connect a shielded parallel interface cable to the connector
on the back of the printer. Fasten the connector with the
two wire clips.
3. Connect the other end of the interface cable to the back of
your computer. Tighten the screws on both sides of the
connector.
12
Setup
reset button
interface connector