Arcflash Labs EMG-01 Beta Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Arcflash Labs EMG-01 Beta. Arcflash Labs EMG-01 Beta 16 pagina's. 8 stage igbt coilgun
Pagina afdrukken
IT IS STRONGLY ADVISED TO READ THIS ENTIRE MANUAL PRIOR TO
POWERING ON THE GUN
FAILURE TO ADHERE TO THESE PROCEDURES COULD RESULT IN
IMMEDIATE AND CATASTROPHIC DAMAGE TO THE EMG-01B.
FAILURE TO ADHERE TO THE PROCEDURES IN THIS MANUAL SHALL
RENDER ANY EXPRESS OR IMPLIED WARRANTIES VOID.
- ALWAYS ENSURE THE POWER SWITCH IS SET TO THE DISCHARGE (FORWARD) POSITION
BEFORE INSERTING THE FUSE OR BATTERY.
- NEVER INSERT THE FUSE WITH THE SWITCH IN THE ON (REARWARD) POSITION.
1. Introduction
The Arcflash Labs EMG-01B (Electro-Magnetic Gun – 01 Beta) is an 8 stage low voltage capacitor
augmented fully automatic coilgun.
It features 8 stages controlled by a nanosecond-precise microcontroller which allows for firing up
to 8 rounds per second at >45m/s.
The EMG-01B is configured to ONLY fire 0.25x0.75" steel projectiles (dowel pins). Arcflash Labs
recommends the use of 2575 Magnetic Armatures (sold separately) but any 0.25x0.75" steel dowel pin
should work.
The EMG-01B is shipped standard with the MG18 constant-pressure fed magazine which can hold
up to 18 rounds single stacked and fire the entire magazine on full-auto mode. The EMG-01B is also
backward compatible with the SG18 magazine of the SGP-35. The gun is also shipped standard with a
6S Lithium Polymer battery (charger sold separately) which can provide power for over 100 shots
before needing to recharge.
As a beta tester of the EMG-01, you are privileged to join an exclusive community of
electromagnetic gun developers and enthusiasts around the globe. Until now, only a handful of
individuals have ever seen an electromagnetic gun, let alone fired one. Congratulations on being
selected to own a piece of history.
3 |
P a g e