Digiever DIGIARRAY DA-4000E Snelle installatiehandleiding - Pagina 6
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Digiever DIGIARRAY DA-4000E. Digiever DIGIARRAY DA-4000E 9 pagina's.
Pagina afdrukken Change the RAID Type of DIGIARRAY
Please follow below steps to modify the RAID type of DIGIARRAY that has
been added to the NVR.
1.
Remove DIGIARRAY from NVR
Remove the volume of DIGIARRAY from NVR Storage Volume Pool.
Unplug the eSATA cable from NVR.
Power off the DIGIARRAY by pressing its power button until the there
is a "beep" sound.
2.
Clear RAID Type
Adjust DIGIARRAY's RAID type to "Clear RAID" on
the rear panel of DIGIARRAY.
Simultaneously press "reset button" and "power button" until there
is a beep sound. When DIGIARRAY powers on with a beep sound,
the RAID configuration is done.
Press the power button to power off DIGIARRAY
3.
Change RAID Type
Adjust dip switch to configure RAID type.
Simultaneously press "reset button" and
"power button" until there is a beep sound.
When DIGIARRAY powers on with a beep
sound, the RAID configuration is done.
DIGIARRAY now is ready to connect to NVR.
Note: Before change DIGIARRAY's RAID type, please make sure
1. eSATA cable is unplugged to DIGIEVER NVR
2. DIGIARRAY has been removed from NVR's storage volume pool.
5