ARCHPOT APF Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ARCHPOT APF. ARCHPOT APF 8 pagina's. Manual burner system

Figure 2

SUPPORT

PLATE

LEDGE

MOUNTING BRACKET

3. The natural gas source line must be installed underground between each vessel, as shown in Figure 2.

4. The natural gas source line must be reduced to 1/2" NPT for fire tables 42"+ and 3/8" NPT for fire vessels 24" - 36".

5. Using pipe sealer, attach supplied flex line to natural gas source line. Then attach the other end of the flex line to

key valve assembly. Do not kink or make a tight radius bend on the gas hose.

6. From Key Valve Assembly connect Flex Line to the Burner Assembly.

7. Check all gas connections tight, position the burner assembly so that it sits level in the bowl.

Rotate as required so that the gas hose rests in a compact position.

Key Valve Assembly

(Inside View)

NOTE: Leak Test – it is highly recommended to perform a gas leak test at this point in the install.

Turn on the gas supply and then, using a soapy water solution spray on the gas line connections

to ensure no leaks exist.

SUPPORT PLATE

FLEX LINES

DRAIN

BURNER RING

NATURAL GAS SOURCE LINE

Key Valve Assembly

(Outside View)

KEY VALVE

ASSEMBLY