Accusplit AX602M500 Gebruiksaanwijzing - Pagina 13
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Accusplit AX602M500. Accusplit AX602M500 15 pagina's. Digital quartz stopwatches
48-49
Press [START • SPLIT] (S3) to toggle between
KM and MILE. To select the following digits,
press [STOP • RESET] (S2). The far right digit will
blink and you can set the distance from the least
signifi cant digit to the most signifi cant digit. The
distance can be set in the range 0.000 to 1999.999
km (or ML) using [START • SPLIT] (S3). Press
[RECALL] (S4) or [MODE] to exit from the setting
mode.
As an example, the distance is set at 400m.
48
50-51
Press [START • SPLIT] to record more lap times
and show different speeds. Note that as the speed
exceeds the value 1999.999 km/hr or 1999.999
mph, "Err" will be shown and no storage will be
made for that record.
[START • SPLIT]
50
° 0.4 km = 400m
° Stop indicator
Speed in km/hr
Speed Mode Running
Press [START • SPLIT] to start the Speed timer.
The "STOP" indicator is OFF . The maximum time
can be up to 19 hr. 59 min. 59.99 sec.
While the timer is running, press [START • SPLIT]
to record the lap time and the corresponding
speed (in km/hr or mph) will be displayed on the
upper line. The lap counter (shown on the upper
left corner) will advance by one.
[START • SPLIT]
To stop the speed measurement, press [STOP •
RESET] to stop the timer.
49
51