Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Handleiding voor probleemoplossing

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installatie Opmerking (14 pagina's), Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Installatie Opmerking (18 pagina's), Gebruikershandleiding (17 pagina's), Installatie Opmerking (24 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Handleiding voor probleemoplossing

Troubleshooting

During power up, your Cisco Catalyst 6500 Series switch or Cisco 7600 Series Internet Router goes
through a system check. This system check also includes all the modules (for example, the MWAM) that
are installed.
If your MWAM is not powering up properly, begin troubleshooting using the procedures in this
appendix. This appendix guides you through some initial checks and procedures that can solve some
basic MWAM problems. It can also direct you to the appropriate document for detailed troubleshooting
information and procedures to solve more complex problems.
This appendix contains general problem solving information about your Catalyst 6500 switch or Cisco
7600 router and specific problem solving information about your MWAM module in the following
sections:
General Problem Solving, page B-2
MWAM Problem Solving, page B-4
MWAM System Error Messages, page B-6
Tip
If you cannot locate the source of the problem, contact a customer service representative for information
on how to proceed. For technical support information, see the Cisco Information Packet publication that
shipped with your product. Before you call, have the following information ready:
Chassis type and serial number
Maintenance agreement or warranty information
Type of software and version number
Date you received the new chassis
Brief description of the problem
Brief explanation of the steps you have taken to isolate the problem
For specific troubleshooting details about the Catalyst 6500 switch or Cisco 7600 router, refer to the
Troubleshooting chapters in the following books:
Catalyst 6500 Series Switch Installation Guide—Appendix E
Cisco 7600 Series Router Installation Guide—Chapter 4
OL-7469-04
A P P E N D I X
Multiprocessor WAN Application Module User Guide
B
B-1