Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Handleiding voor probleemoplossing - Pagina 5

Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Installatie Opmerking (14 pagina's), Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Installatie Opmerking (18 pagina's), Gebruikershandleiding (17 pagina's), Installatie Opmerking (24 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Appendix B

Troubleshooting

Determining the MWAM Cisco IOS Image Name

To determine the MWAM Cisco IOS image name, execute the following command at the Cisco

Supervisor 2 (see the

show cdp entry *

You can also execute the following command at the Supervisor to determine the MWAM Cisco IOS

image name:

session slot x processor [2-6]

Then issue the following command:

show version

You can also enter the following command from the privileged EXEC mode (also available through

show images at the processor complex):

show version

Verifying the MWAM Configuration

To determine the MWAM configuration, see the

page

The following shows a possible DIMM issue (CSCin29212) that may be solved by re-inserting the

DIMM memory:

*** Cache Error Exception***

Cache Err Reg = 0x14001f20

instruction reference, primary cache, , tag field error, error on internal request on

SysAD Bus,

PC = 0x800fb5d4, Cause Reg = 0x20008068, Status Reg = 0x400005

%MWAM-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred,

A_BUS-L2_ERRORS: 0x0, A_BU

A-MEMIO-ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0x80DC0000

RRECTABLE_ECC_ERR: A correctable ECC error has occurred.

You can improve system performance (by 6 to 12 percent depending on the traffic type) by turning off

VLAN accounting:

Router# configure terminal

Router(config)# no vlan accounting

Router#

OL-7469-04

"Software Description" section on page 1-7

6-14.

for more details):

"Verifying the MWAM Configuration" section on

Multiprocessor WAN Application Module User Guide

MWAM Problem Solving

B-5