Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Sorun Giderme Kılavuzu - Sayfa 5

Anahtar Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Sorun Giderme Kılavuzu indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 11 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Kurulum Notu (46 sayfalar), Beyaz Kitap (19 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Kurulum Notu (18 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

Sayfayı Yazdır
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Sorun Giderme Kılavuzu
Appendix B
Troubleshooting
Determining the MWAM Cisco IOS Image Name
To determine the MWAM Cisco IOS image name, execute the following command at the Cisco
Supervisor 2 (see the
show cdp entry *
You can also execute the following command at the Supervisor to determine the MWAM Cisco IOS
image name:
session slot x processor [2-6]
Then issue the following command:
show version
You can also enter the following command from the privileged EXEC mode (also available through
show images at the processor complex):
show version

Verifying the MWAM Configuration

To determine the MWAM configuration, see the
page

DIMM Issue

The following shows a possible DIMM issue (CSCin29212) that may be solved by re-inserting the
DIMM memory:
*** Cache Error Exception***
Cache Err Reg = 0x14001f20
instruction reference, primary cache, , tag field error, error on internal request on
SysAD Bus,
PC = 0x800fb5d4, Cause Reg = 0x20008068, Status Reg = 0x400005
%MWAM-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred,
A_BUS-L2_ERRORS: 0x0, A_BU
A-MEMIO-ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0x80DC0000
RRECTABLE_ECC_ERR: A correctable ECC error has occurred.

MWAM Performance Tuning

You can improve system performance (by 6 to 12 percent depending on the traffic type) by turning off
VLAN accounting:
Router# configure terminal
Router(config)# no vlan accounting
Router#
OL-7469-04
"Software Description" section on page 1-7
6-14.
for more details):
"Verifying the MWAM Configuration" section on
Multiprocessor WAN Application Module User Guide
MWAM Problem Solving
B-5