Cisco 9124 - mds multilayer fabric switch Configuratiehandleiding - Pagina 35

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 pagina's. Mds 9000 series
Ook voor Cisco 9124 - mds multilayer fabric switch: Specificaties (2 pagina's), Gegevensblad (9 pagina's), Specificaties (3 pagina's), Release Release (48 pagina's), Release Release (44 pagina's), Release Release (36 pagina's), Release Release (22 pagina's), Release Release (3 pagina's), Release Release (40 pagina's), Handmatig (16 pagina's), Hardware installatiehandleiding (36 pagina's)

Figure 27 Both C-Series switches are target portals

C-Series switch side: conﬁguring transparent-mode static mapping

The iSCSI-enabled C-Series switches have two modes of mapping IP addresses:

•

Transparent-mode dynamic mapping

•

Transparent-mode static mapping

You must enable static mapping for each iSCSI Initiator for persistent LUN mapping from the Fibre

Channel storage controller.

Using the Cisco Device Manager, select IP > iSCSI from the menu bar.

The IP iSCSI window opens

Figure 28 IP iSCSI window

Clear the Discovery Dynamic check box

(Figure

28).

(Figure

29).

C-Series iSCSI