Cisco 9124 - mds multilayer fabric switch Panduan Konfigurasi - Halaman 35

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 halaman. Mds 9000 series
Juga untuk Cisco 9124 - mds multilayer fabric switch: Spesifikasi (2 halaman), Lembar data (9 halaman), Spesifikasi (3 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Manual (16 halaman), Panduan Pemasangan Perangkat Keras (36 halaman)

Halaman Cetak
Cisco 9124 - mds multilayer fabric switch Panduan Konfigurasi
Figure 27 Both C-Series switches are target portals
C-Series switch side: configuring transparent-mode static mapping
The iSCSI-enabled C-Series switches have two modes of mapping IP addresses:
•
Transparent-mode dynamic mapping
•
Transparent-mode static mapping
You must enable static mapping for each iSCSI Initiator for persistent LUN mapping from the Fibre
Channel storage controller.
1.
Using the Cisco Device Manager, select IP > iSCSI from the menu bar.
The IP iSCSI window opens
Figure 28 IP iSCSI window
2.
Clear the Discovery Dynamic check box
(Figure
28).
(Figure
29).
C-Series iSCSI
35