Cisco 9124 - mds multilayer fabric switch Panduan Konfigurasi - Halaman 36

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Cisco 9124 - mds multilayer fabric switch. Cisco 9124 - mds multilayer fabric switch 49 halaman. Mds 9000 series
Juga untuk Cisco 9124 - mds multilayer fabric switch: Spesifikasi (2 halaman), Lembar data (9 halaman), Spesifikasi (3 halaman), Catatan Rilis (48 halaman), Catatan Rilis (44 halaman), Catatan Rilis (36 halaman), Catatan Rilis (22 halaman), Catatan Rilis (3 halaman), Catatan Rilis (40 halaman), Manual (16 halaman), Panduan Pemasangan Perangkat Keras (36 halaman)

Figure 29 Discovery Dynamic check box

Select the Node Address Persistent check box

Select the Node Address System Assigned check box

Figure 30 Node Address Persistent and Node Address System Assigned check

boxes

Click Apply.

Close the IP iSCSI window.

Select Admin > Save Conﬁguration from the Device Manager menu bar.

Conﬁgure transparent-mode static mapping on both iSCSI-enabled C-Series switches.

Zoning the iSCSI Initiator and Fibre Channel storage WWPNs

The unique WWPN of the iSCSI Initiator acts as a virtual Fibre Channel host available on the Fibre

Channel SAN. The WWPN is zoned with Fibre Channel storage as if it were a Fibre Channel HBA.

Use either the Fabric Manager or the switch CLI to create and modify SAN zones. HP recommends

creating separate iSCSI zones that contain the iSCSI WWPNs and the storage WWPNs that they access.

See the Cisco conﬁguration documentation for information on creating, modifying, or activating SAN

zones.

Figure 31

shows an iSCSI Initiator zoned with an Enterprise Virtual Array storage port.

(Figure

30).

(Figure

30).