DigiSpec DTT-PRO Bedieningshandleidingen - Pagina 14

Blader online of download pdf Bedieningshandleidingen voor {categorie_naam} DigiSpec DTT-PRO. DigiSpec DTT-PRO 16 pagina's. Digital date / time titler

Pagina afdrukken
PROGRAMMING

EXIT

Move the cursor by pressing the "Up" or "Down" buttons to the "EXIT" and press the "Select" button to go
back to the "MAIN MENU"
TITLER
TIME-DATE
VL OUTPUT
GRAYSCALE
BORDER
EXIT

Video Loss Detection

When the video goes missing from the DTT-Pro, a red warning background (along with the "VL OUTPUT" setting page 11)
will be displayed with the message flashing "VIDEO LOSS" in large characters. The Date and Time when the video went
missing will also be inserted under the "VIDEO LOSS" message. This will warn an operator of the video loss condition
and give the time and date of this occurrence. If the video is recorded to tape, the date and time will provide when the video
loss had occurred.
Press the "UP" or "Down" button to move up or down the Video Loss message, Title and Date-Time display on the
screen.
Press "Select" button for going to the Programming mode
NOTE :
The Video Loss Message, Title and Date-Time can be set to ON or OFF. Please refer to page 11 and 12.

Master Reset

DOING A MASTER RESET CLEARS ALL PROGRAMMING AND
Power down DTT-Pro by taking out the power line. Then press and hold the "Up" button and plug in the power. Hold the
"Up" button until the Copyright and Version display appear on the screen.
The internal rechargeable NiMH battery needs a full 24 Hr charge if fully discharged to be fully charged and hold memory
backup for 8 weeks.
DISPLAY
ON
ON
RED
THE DTT-Pro DEFAULTS TO THE FACTORY SETTINGS.
DTT-Pro (DATE/TIME TITLER)
VIDEO LOSS
DTT AVE
NTSC
JAN-01-10 8:00:00 A
WARNING!
14
MAIN MENU
TITLER SETUP
TIME - DATE
DISPLAY
EXIT